Smart WIFI Camera with Battery Quick User Guide 100% Wire‐Free IP Camera with rechargeable battery Place it Anywhere, Watch on Phone Anytime 1
1. Product Details No. Camera key Operation 1 Power Key Press and hold for 5 seconds to power on/power off 2 Power Key Quick press 1 second to wake up the camera from standby mode 3 Reset Key Press and hold for 5 seconds, it will reset and restart 4 Reset Key Quickly click to enter AP distribution mode No.
NOTE: Please ALLOW below 2 permissions when first running App. 1. Allow CloudEdge use mobile cellular data and wireless LAN (If not allowed, it will be failed to add IP camera). 2. Allow CloudEdge to get system push message permissions (When the camera triggers motion detection or audible alarm, the phone can receive alarm push). Register Account: New users need to register by e‐mail, click "Register", follow the steps to complete the registration of the account, and log in. 2.
. Add camera 4.1 Bring the camera and phone to the router within 1 to 3 feet (30 to 100 cm) and connect wifi. NOTE: Please note camera only works under 2.4G Wi‐Fi, not supports 5G Wi‐Fi. 4.2 Run CloudEdge App, Click and select “BATTERY CAMERA”. 4.3 Follow the instructions to ensure that the camera is activated and the indicator light enters the red light and flashes slowly. 4.4 Select 2.4Ghz WiFi SSID and input password, tap NEXT 4.5 Put the QR code in front of the camera lens 15cm.
. Device Menu 1. Add a camera 16. Network signal strength 2. Camera time 17. Preview options 3. Live view button 18. playback options 4. Camera type icon 19. Screenshot button 5. Camera name 20. Record button 6.Alarm information icon red dot indicates 21. Human body detection option. green is activated, default is on, and it is detected by human body infrared detection. alarm occurs, click to view alarm screenshot or video 7. My device list 22. Sound options, start can listen 8.
. Adjust the PIR Detecting Distance PIR “Body Detection” is default on and the default sensitivity is at “Mid” and the detecting distance is 6 meters (20ft), and it is adjustable in “My Device” ‐> “Device Settings” ‐> "Body Detection". Sensitivity Detecting Distance (For moving and living things) Low Up to 4 meters (13ft) Medium Up to 6 meters (20ft) High Up to 8 meters (26ft) *NOTE: Higher sensitivity offers longer detecting distance, but it would lead to more false alarms.
8. Battery management 8.1 The camera has a built‐in 6000 mAh 18650 battery, which can be used for 60‐90 days in theory, according to the wake‐up of 15 times a day and watching 10 minutes of video. ( Note: The life of the battery depends on the number of times the camera is woken up. The more the number of wakeups, the faster the battery capacity is consumed.) 8.2 If the battery capacity is less than 20%, the app will send an alarm message to remind you to charge in time. 8.
9.2 Cover the Monitoring Area When installing the camera, it’s not suggested to make the PIR sensor vertically face the moving object, otherwise it may not detect the motion events. It is suggested to make the angular between PIR sensor and detected object larger than 10 degree. Appendix: troubleshooting sheet Trouble Shooting Sheet No. Description Solution and operation 1 Unable to connect 1) Check your WiFi name and password 2) Ensure your WiFi is 2.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.