User Manual PTZ Battery-Powered Security Camera
Catalog I. Product description ........................................................................................................... 3 II. Add camera to APP ............................................................................................................. 4 1.Download "Cloud Edge" APP ......................................................................................... 4 2.Register Account ..................................................................................................
Statement 1)Although every effort is made to make the manuals complete and accurate, there may be some discrepancies due to product updates. 2)Products and manuals are subject to change without notice. 3)The contents of this manual are for reference only and we do not guarantee that the accessories or app will be exactly the same as the one you receive. 4)If you have any problems with your camera, please feel free to contact us for assistance. We are always available to answer any questions you may have.
Power Key II.
Note: When using the application for the first time, please turn on the following 2 permissions. Allow "CloudEdge" to access mobile cellular data and WLAN, otherwise you will not be able to add devices. Allow "CloudEdge" to receive messages, otherwise the phone will not receive alert push notifications when motion detection or audible alerts are triggered. The following is a screenshot of IOS cell phone operation, Android cell phone permissions open method is basically the same as this method. 2.
What if the camera cannot be turned on? 1.Try to charge the device and then turn it on again. 2.Please try several times to hold down the power key Continuously. 3.Contact Customer Service 4.Connect WI-FI Steps Step 1: Place the camera and smartphone within 1 to 3 feet (30 to 100 cm) of the router to ensure strong Wi-Fi signal. Note: The camera only works with 2.4G Wi-Fi and does not support 5G Wi-Fi. Step 2: Run the "CloudEdge" application, click and select "Battery Camera".
1. Please make sure you are using 2.4GHz WI-FI. In our experience, most users fail to connect the WI-FI because of selecting 5GHz WIFI and adding the camera incorrectly. If you don't know how to distinguish between the 2.4 GHz and 5 GHz WI-FI names on your router, we suggest you google the answer. 2. Make sure you use the correct Wi-Fi password and a fast WI-FI network. 3. Make sure the QR code on the phone screen is normal and the distance between the phone and the camera lens is 10-15cm (3.9-5.
III. Mounting the camera to the wall Note: In order to obtain the best product performance and avoid unnecessary environmental disturbances, please pay attention to the following during the installation process: 1.Do not install the product nearly to the heat sources, such as outdoor units of air conditioners, kitchen exhausts, etc. 2.Make sure there are no reflections within 5 feet (1.5 meters) of the PIR sensor, otherwise it will interfere with the normal function of the sensor. 3.
Recommended installation height: 8-10 feet (2.4m-3m) from the ground, at this height the sensor will provide a maximum detection distance of 35 feet (10m). For the best coverage, you can adjust the vertical angle of the camera to the appropriate angle. We recommend tilting the camera down at an angle of 15° .
IV. Function introduction 1.Main Page 1.Go to the video view page 2.Simultaneous playback of four screens 3.Adding Devices 4.Device Sharing 5.View alarm pictures and video 6.Cloud Storage 2.Preview page 1.Parameter settings (alarm settings, video, lighting, device information, firmware upgrade, etc.) 2.Turn the microphone on/off 3.Video definition settings (SD, HD options) 4.Full screen display 5.SD card video playback 6.Cloud Storage Video Playback 7.Manual Screen-shot 8.
12.Albums (store screen-shots and manual video files) Tip: Stretch the video screen with two fingers to zoom in on the image and view image details. 3.Video replay page 1.Video timeline with drag-and-drop time selection 2.Timeline zoom button 3.Select video playback date 4.Select alarm video clips 5.Video Screen-shot 6.Record video, first click to start recording, click again to end recording 7.
4.Setup page 1.Get device information (network information, Mac address, time zone) 2.Installation Guide, Network Diagnostics 3.Turn off the light, night vision settings, check the battery level 4.Set the length of recording, alarm interval, optimize the battery life 5.Motion detection settings, adjust the detection sensitivity, etc. 6.Video settings, view SD card capacity, format 7.Device firmware version information, version upgrade 8.Delete the device and operate it before rewiring 9.
will automatically start saving the video. How to watch videos on SD card: 1)Click the "History" or "Alert" button on the alarm information icon in the app to enter the video playback interface. Drag the timeline or select the alarm point to find the corresponding time period you want to record. 2)Insert the SD card into your computer. The video file is in MP4 format. You can play the video directly using the viedo player. 7.
environment and downwards in cold temperature environment. At the same time in very low temperatures, heavy clothing will hinder the PIR sensor detection. 6.Sunlight UV rays will interfere with the PIR sensor, the camera's PIR in the case of direct exposure to strong sunlight, there is a probability that the alarm is not sensitive and other undesirable phenomena. 7.If you notice poor motion detection performance in nighttime environments, try turning off "Night Detection". 8.Battery Management 1.
2.Battery life If the device does not detect a moving object, the device will go into sleep mode to reduce the power consumption of the device. If the device detects a moving object, it quickly wakes up and starts within 1 second and takes a screen-shot and records a video.
working light of the equipment lights up normally. 2) Check whether the WIFI network is good and restart the router. 3) If the location of the device according to the router is far away, resulting in the inability to obtain a good WIFI signal, it is recommended to move the router to a closer location, or add a WIFI amplifier to enhance the home WIFI performance. 4) Remove the floodlight camera from your CloudEdge account, Reset the device, and then re-add it.
understand. 2. Please leave a full 5-star review for us 3. Please do not take a picture of this gift card and leave it in your comment. How to get a free gift? 1. Log in to your buyer account and click on "My Orders" to find our products. 2. Please leave your true feelings about using it. 3. After waiting for Amazon to approve your review, please send us a screenshot of your 5-star review and tell us your order number.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.