User’S Manual USER’S MANUAL OF THE BLUETOOTH KEYBOARD CASE FCC ID: PD8X9001
Keyboard Case Operation Instruction of the iPad Keyboard Case: 1、Place the case to a comfortable position. This Keyboard can be 360°rotated with multi-view angle available. 2、You will find the On/Off switch and Bluetooth Button on the right bottom side of the keyboard. On/Off Switch Bluetooth Button *The built-in lithium battery will support 120 hours continuously typing when fully charged. Please charge the keyboard with the USB cable included.
Keyboard Case Step III Pair the keyboard to your iPad Press the Bluetooth key to send the Bluetooth signal. Turn your iPad on and tap “Settings”---“General”---“Bluetooth” Slide the Bluetooth to “On” and your iPad will start to search for Bluetooth devices When it finds the “Bluetooth Keyboard Case”, tap it and begin pairing. Enter the password showed on the blue window and press the “Enter” key on the keyboard Step III is only needed for the initial setup.
Keyboard Case About the Keyboard + Language Switch + C Copy + V Paste + X Cut + Z Redo + To the top of the text + To the end of the text + Delete the whole line Shift + Select text rightward Shift + Select text leftward Shift + Select text upward Shift + Select text downward 4
Keyboard Case Technical Specification Of The Product: Bluetooth Specification:Version 3.0 Operation Current: <1.5mA Standby Current: <0.5mA Operation Voltage: 3.7V Charging Voltage: 110-240V Battery Type: Lithium Battery Charging period: 2hours (For the first time, please charge for 12 hours) Trouble Shooting: If you are unable to connect the keyboard to your iPad, please try the following: z Check if the battery is low. When the battery is low, some keys will react slowly and even won’t work.
IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.