User's Manual

ManualsBrandsSHENZHEN COVALUE COMMUNICATIONS ManualsElectronicsFM TRANSCEIVER

Instruction Manual



Thank you forpurchasing a COVALUE   This simple to use radio adopts the latest

advancesintechnology,providingreliablecommunication in today’ sdemanding communication

environment.



NoticetotheUser:

· Pleasereadthisinstructionmanualbeforeoperatingthisradio.

· It’sprohibitedtousetheradioorchargeitatanyareawithapotentiallyexplosiveatmosphere

(where the air contains gas, dust and smog, etc.), as well as while taking on fuel, or while

parking at a  gasoline service station; or any area where radio communication is prohibited

(suchasahospitaloraairport.)

· It’s prohibitedtooperatethe radiowithoutpermission in areas wherethegovernmentlaws

prohibitradiocommunication.

· Pleasedon'texposetheradiotodirectsunlightforalongtime;don'tplacetheradionearany

heatingdevices,either.

· Pleasedon'tputtheradioinextremelydusty,moisthumidareasorunstablesurfaces.

· Onlyqualifiedpersonal,with propertoolsandinstrumentsareallowed to serviceandrepair

theradios,donotdisassembletheradiobyyourselftoavoiddamages.



FM TRANSCEIVER.

Summary of content (13 pages)

PAGE 1
Instruction Manual Thank you for purchasing a COVALUE FM TRANSCEIVER. This simple to use radio adopts the latest advances in technology, providing reliable communication in today’s demanding communication environment. Notice to the User: · Please read this instruction manual before operating this radio. · It’s prohibited to use the radio or charge it at any area with a potentially explosive atmosphere (where the air contains gas, dust and smog, etc.
PAGE 2
Product Safety and RF Exposure for Portable Two-Way Radios Compliance with RF Energy Exposure Standards NOTICE: This radio is intended for use in occupational/controlled applications where users have been made aware of the potential for exposure and can exercise control over their exposure. This radio device is NOT authorized for general population, consumer or similar use.
PAGE 3
*Use only FCC‐approved, supplied or replacement headsets, batteries, and accessories intended for use with this radio. Use of non‐FCC approved headsets, batteries and accessories may exceed FCC RF exposure guidelines. FCC Warning： Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 4
PROFESSIONAL DIGITAL TWO‐WAY RADIO DR7800 SERIES DR7800/7810/7820/7600/7610/7620/7500/7510/7520 DIGITAL PORTABLE RADIOS QUICK REFERENCE GUIDE DR7800 SERIES Digital Portable Radios Quick Reference Guide NOTE: Refer to User Guide for more details on your radio's operations/features.
PAGE 5
Non‐Keypad Radio Record your radio’s programmable button functions in the blanks provided. SP represents short press, LP represents long press.
PAGE 6
①Channel Selector Knob ②On/Off/Volume Control Knob ③LED Indicator ④Side Button 1 (Programmable) SP: __________ LP: ___________ ⑤Push‐to‐Talk (PTT) Button ⑥Side Button 2 (Programmable) SP: ____________LP: ___________ ⑦Side Button 3(Programmable) SP: ___________ LP: ___________ ⑧Front Button P1 (Programmable) SP: ___________ LP: ___________ ⑨OK/Menu Button ⑩2‐Way Navigation Button 11 Keypad ○ 12 ○ Return/Home Button 13 ．Front Button P2 (Programmable) ○ SP: ___________ LP: ___________ 14 ．Display ○ 15 ．Micro
PAGE 7
Battery The number of bars (0 – 3) shown indicates the charge remaining in the battery. Scanning Scan land on Scan feature is enabled. Encryption Enable The Privacy feature is enabled. Accessories Connected Power Level Radio is set at Low power. Radio is set at High power.
PAGE 8
The following icons appear during a call, and in the Contacts list to indicate ID type. Private Call Indicates a Private Call in progress. In the Contacts list, it indicates a subscriber alias (name) or ID (number). Group Call/All Call Indicates a Group Call or All Call in progress. In the Contacts list, it indicates a group alias (name) or ID (number). ■ Sent Items Icons The following icons appear at the top right corner of the radio’s display in the Sent Items folder.
PAGE 9
■ Adjusting the Volume To increase the volume, turn the On/Off Volume Control Knob clockwise. To decrease the volume, turn this knob counterclockwise. ■ Accessing the Radio from Password 1. Power up the radio. 2. You hear a continuous tone. 3. Enter your current six‐digit password with the radio’s keypad. The display shows Press OK to proceed. You hear a positive indicator tone for every digit pressed. Press ****** . to remove the each * on the display. 4.
PAGE 10
OR You hear a negative indicator tone, indicating the radio has switched from Zone 2 to Zone 1. ■ Selecting a Channel Once the required zone is displayed (if you have multiple zones in your radio), turn the programmed Channel Selector Knob to select the channel. ■ Making a Group Call 1. Turn the Channel Selector Knob to select the channel with the active group alias or ID. 2. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3. Press the PTT button to make the call.
PAGE 11
Press the programmed One Touch Access button and proceed to Step 5. OR Follow the procedure below. 1. to access the menu. 2. or 3. or to Contacts and press to select. to the required subscriber alias or ID and press to select. OR or to Manual Dial and press to select. Enter the subscriber ID you want to page and press . NOTE：Not applicable for Limited Keypad Radio 4. or to Call Alert and press to select. 5.
PAGE 12
4. or to the required Quick Text and press to select. 5. A blinking cursor appears. Use the keypad to edit the message, if required. to move to the left. Press to move to the right. Press Press the *DEL key to delete any unwanted characters. Press the # key to input one space to the right. once message is composed. 6. Press 7. or to the required alias or ID and press to select. OR or to Manual Dial and press Key in the subscriber alias or ID and press to select. . OR to edit the message.
PAGE 13
If the message is not sent, a low tone sounds and the display shows negative mini notice. □ Non‐Keypad Radio You can send Quick Text messages, programmed by your dealer, via the programmable button. 1. Press the programmed One Touch Access button to send a predefined Quick Text message to a predefined ID. 2. The LED lights up solid red. 3. Two chirps indicate that the message is sent successfully. OR A low‐pitched tone indicates that the message cannot be sent.