Instruction Manual

ManualsBrandsSHENZHEN COVALUE COMMUNICATIONS ManualsElectronicsTwo Way Radio

Instruction Manual

DR5500S/5510S/5600S/5610S/5800S/5810S

DMR/FM Portable Radio



Thank you for purchasing a COVALUE two‐way radio. This simple to use radio adopts the latest

advancesintechnology,providingreliablecommunicationintoday’sdemandingcommunication

environment.



NoticetotheUser:

· Pleasereadthisinstructionmanualbeforeoperatingthisradio.

· It’sprohibitedtousetheradioorchargeitatanyareawithapotentiallyexplosiveatmosphere

(where the air contains gas, dust and smog, etc.), as well as while taking on fuel, or while

parking at a gasoline service

 station; or any area where radio communication is prohibited

(suchasahospitaloranairport.)

· It’sprohibitedtooperatetheradio without permission inareaswherethegovernment laws

prohibitradiocommunication.

· Pleasedon'texposetheradiotodirectsunlightforalongtime;Don'tplacethe

radionearany

heatingdevices,either.

· Pleasedon'tputtheradioinextremelydusty,moisthumidareasorunstablesurfaces.

· Only qualifiedpersonal,withpropertoolsandinstrumentsareallowedtoserviceandrepair

theradios,donotdisassembletheradiobyyourselftoavoiddamages.



FCCWarning：

Any Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class

ice, pursuant to part 15 of the FCC Rules. B digital dev

These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference , and (2)

this device must accept any interference received , including interference that may

cause undesired operation .

Summary of content (12 pages)

PAGE 1
Instruction Manual DR5500S/5510S/5600S/5610S/5800S/5810S DMR/FM Portable Radio Thank you for purchasing a COVALUE two‐way radio. This simple to use radio adopts the latest advances in technology, providing reliable communication in today’s demanding communication environment. Notice to the User: · Please read this instruction manual before operating this radio.
PAGE 2
—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver . —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected . —Consult the dealer or an experienced radio / TV technician for help.
PAGE 3
Respectez toujours les procédures suivantes pour contrôler votre exposition et vous assurer de la conformité avec les limites d'exposition professionnelle en milieu de travail / environnementales contrôlées. Des lignes directrices: Ne retirez pas l'étiquette d'exposition RF de l'appareil. Les instructions de sensibilisation des utilisateurs doivent accompagner l'appareil lors de son transfert à d'autres utilisateurs.
PAGE 4
PROFESSIONAL DIGITAL TWO-WAY RADIO DR5800S DR5800S/5810S/5600S/5610S/5500S/5510S DIGITAL PORTABLE RADIOS QUICK REFERENCE GUIDE DR5800S SERIES Digital Portable Radios Quick Reference Guide NOTE: Refer to User Guide for more details on your SERIES
PAGE 5
radio's operations/features. Radio Controls Full Keypad Radio Limited Keypad Radio Non‐Keypad Radio Record your radio’s programmable button functions in the blanks provided. SP represents short press, LP represents long press.
PAGE 6
SP: __________ LP: ___________ ⑧ Side Button 2 (Programmable) SP: __________ LP: ___________ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮ ⑯ LED Indicator Universal Connector for Accessories Microphone Display OK/Menu Button Left Navigation Button Return/Home Button Front Button F2 (Programmable) SP: __________ LP: ___________ ⑰ Right Navigation Button ⑱ Front Button F1 (Programmable) SP: __________ LP: ___________ ⑲ Keypad
PAGE 7
Display Icons (LCD model only) The following are the icons that appear on the radio’s display.
PAGE 8
In-Progress: •The text message to a group alias or ID is pending transmission •The text message to a subscriber alias or ID is pending transmission, followed by waiting for acknowledgement ■ LED Indicator Blinking red – Radio is at low battery condition Solid Orange – Powering up Solid green – Radio is receiving, or detecting activity over the air.
PAGE 9
Press the programmed Zone button and proceed to Step 2. OR Follow the procedure below. 1. 2. to access the menu. or to Zone and press to select. 3. The current zone is displayed and indicated by a ⊙. □ Non‐Keypad Radio The non‐keypad radio supports up to 32 channels and 2 zones, with a maximum of 16 channels per zone. 1. Press the programmed Zone button. 2. You hear a positive indicator tone, indicating the radio has switched from Zone 1 to Zone 2.
PAGE 10
5. Release the PTT button to listen. When the target radio responds, the LED lights up green. 6. If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the target radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. OR If there is no voice activity for a predetermined period of time, the call ends. 7. You hear a short tone. The display shows Call Ended.
PAGE 11
□ Full Keypad Radio Press the programmed Text Message button and proceed to Step 3. OR Press the programmed One Touch Access button to send a predefined Quick Text message to a predefined alias or ID and proceed to Step 6. OR Follow the procedure below. 1. to access the menu. 2. or to Messages and press to select. 3. or to Quick Text and press to select. 4. or to the required Quick Text and press to select. 5. A blinking cursor appears. Use the keypad to edit the message, if required.
PAGE 12
2. or to Messages and press to select. 3. or to Quick Text and press to select. 4. or to the required Quick Text and press to select. 5. or to the required alias or ID and press to select. The display shows transitional mini notice, confirming your message is being sent. 6. If the message is sent, a tone sounds and the display shows positive mini notice. OR If the message is not sent, a low tone sounds and the display shows negative mini notice.