Instruction Manual

ManualsBrandsSHENZHEN COVALUE COMMUNICATIONS ManualsElectronicsTwo Way Radio

Instruction Manual

DR5500-1/5510-1/5600-1/5610-1/5800-1/5810-1

Two Way Radio



Thank you for purchasing a COVALUE two‐way radio. This simple to use radio adopts the latest

advancesintechnology,providingreliablecommunicationintoday’sdemandingcommunication

environment.



NoticetotheUser:

· Pleasereadthisinstructionmanualbeforeoperatingthisradio.

· It’sprohibitedtousetheradioorchargeitatanyareawithapotentiallyexplosiveatmosphere

(where the air contains gas, dust and smog, etc.), as well as while taking on fuel, or while

parking at a gasoline service

 station; or any area where radio communication is prohibited

(suchasahospitaloranairport.)

· It’sprohibitedtooperatetheradio without permission inareaswherethegovernment laws

prohibitradiocommunication.

· Pleasedon'texposetheradiotodirectsunlightforalongtime;Don'tplacethe

radionearany

heatingdevices,either.

· Pleasedon'tputtheradioinextremelydusty,moisthumidareasorunstablesurfaces.

· Only qualifiedpersonal,withpropertoolsandinstrumentsareallowedtoserviceandrepair

theradios,donotdisassembletheradiobyyourselftoavoiddamages.



FCCWarning：

Any Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference , and (2)

this device must accept any interference received , including interference that may

cause undesired operation .

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and

Summary of content (11 pages)

PAGE 1
Instruction Manual DR5500-1/5510-1/5600-1/5610-1/5800-1/5810-1 Two Way Radio Thank you for purchasing a COVALUE two‐way radio. This simple to use radio adopts the latest advances in technology, providing reliable communication in today’s demanding communication environment. Notice to the User: · Please read this instruction manual before operating this radio. · It’s prohibited to use the radio or charge it at any area with a potentially explosive atmosphere (where the air contains gas, dust and smog, etc.
PAGE 2
on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver . —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected . —Consult the dealer or an experienced radio / TV technician for help.
PAGE 3
Use of non-approved antennas, batteries, and accessories causes the radio to exceed the FCC RF exposure guidelines. ISEDC Warning The device has been tested and complies with SAR limits, users can obtain Canadian information on RF exposure and compliance. Après examen de ce matériel aux conformité aux limites DAS, et/ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes.
PAGE 4
QUICK REFERENCE GUIDE DR5800 SERIES Quick Reference Guide NOTE: Refer to User Guide for more details on your radio's operations/features. Radio Controls Full Keypad Radio Limited Keypad Radio Non‐Keypad Radio Record your radio’s programmable button functions in the blanks provided. SP represents short press, LP represents long press.
PAGE 5
⑪ ⑫ ⑬ ⑭ ⑮ ⑯ Microphone Display OK/Menu Button Left Navigation Button Return/Home Button Front Button F2 (Programmable) SP: __________ LP: ___________ ⑰ Right Navigation Button ⑱ Front Button F1 (Programmable) SP: __________ LP: ___________ ⑲ Keypad
PAGE 6
Display Icons (LCD model only) The following are the icons that appear on the radio’s display.
PAGE 7
•The text message to a subscriber alias or ID is pending transmission, followed by waiting for acknowledgement ■ LED Indicator Blinking red – Radio is at low battery condition Solid Orange – Powering up Solid green – Radio is receiving, or detecting activity over the air. Solid RED – Radio is transmitting Blinking Orang – Radio is scanning, or in selective call, or emergency state ■ Powering Up and Turning Off the Radio Rotate the On/Off/Volume Control Knob clockwise until you hear a click.
PAGE 8
1. 2. to access the menu. or to Zone and press to select. 3. The current zone is displayed and indicated by a ⊙. □ Non‐Keypad Radio The non‐keypad radio supports up to 32 channels and 2 zones, with a maximum of 16 channels per zone. 1. Press the programmed Zone button. 2. You hear a positive indicator tone, indicating the radio has switched from Zone 1 to Zone 2. OR You hear a negative indicator tone, indicating the radio has switched from Zone 2 to Zone 1.
PAGE 9
the PTT button to respond. OR If there is no voice activity for a predetermined period of time, the call ends. 7. You hear a short tone. The display shows Call Ended. ■ Scanning Channels Press the programmed Scan button to turn scan on or off. During scan, the LED blinks orange and the scan icon is displayed . ■ Making a Call Alert □ Full Keypad Radio and Limited Keypad Radio Press the programmed One Touch Access button and proceed to Step 5. OR Follow the procedure below. 1. to access the menu. 2.
PAGE 10
Press the programmed One Touch Access button to send a predefined Quick Text message to a predefined alias or ID and proceed to Step 6. OR Follow the procedure below. 1. to access the menu. 2. or to Messages and press to select. 3. or to Quick Text and press to select. 4. or to the required Quick Text and press to select. 5. A blinking cursor appears. Use the keypad to edit the message, if required. Press to move to the left. Press to move to the right.
PAGE 11
4. or to the required Quick Text and press to select. 5. or to the required alias or ID and press to select. The display shows transitional mini notice, confirming your message is being sent. 6. If the message is sent, a tone sounds and the display shows positive mini notice. OR If the message is not sent, a low tone sounds and the display shows negative mini notice. □ Non‐Keypad Radio You can send Quick Text messages, programmed by your dealer, via the programmable button. 1.