G-:JG-:J©@OO Standard Guest Paging System User Manual &® Cl:JCl:J@roOO Beijing MMcall Electronics Co.,Ltd Add:7th Floor, C set Shangdi International Science & Technology Park Haidian District Beijing,China (100085) Tel:010-51663330 Web: www.mmcall.com Beijing MMcall Electronics Co.
® ��©@00 Standard Guest Paging System User Manual Content 1 Introduction ··········································3 1.1 Summary ··········································3 1.2 Parameter········································· -4 1.3 Appearance ······································ -4 2 Operation Guidance ······························7 2.1 Guest Paging ····································7 2.2 Staff Paging ·······································8 2.
® ��©@00 Standard Guest Paging System User Manual Content 1 Introduction ··········································3 1.1 Summary ··········································3 1.2 Parameter········································· -4 1.3 Appearance ······································ -4 2 Operation Guidance ······························7 2.1 Guest Paging ····································7 2.2 Staff Paging ·······································8 2.
® l¼ll¼l©@OO Standard Guest Paging System User Manual ® l¼ll¼l©@OO Standard Guest Paging System User Manual 1.3 Appearance 1.2 Parameter T10 Paging Transmitter as picture 1.1 ; The panel part includes display area, key pad area, scan Category Dimension Parameter 220mm * 130mm * 45mm Display LCD1602, 2*16 characters Keypad 0~9 digit input Power supply Frequency Paging No. in cache Editable Bills No.
® l¼ll¼l©@OO Standard Guest Paging System User Manual ® l¼ll¼l©@OO Standard Guest Paging System User Manual 1.3 Appearance 1.2 Parameter T10 Paging Transmitter as picture 1.1 ; The panel part includes display area, key pad area, scan Category Dimension Parameter 220mm * 130mm * 45mm Display LCD1602, 2*16 characters Keypad 0~9 digit input Power supply Frequency Paging No. in cache Editable Bills No.
��©@00 ® Standard Guest Paging System User Manual ® ��©@00 Standard Guest Paging System User Manual means guest paging interface, 12:07 is time, NUM means to input number. E.g., No. 010 can be input as 10 ······· Display area or 010, then press SEND. If this coaster number is edited and bound together with the bill No., e.g, coaster No. 10 is bound with bill No. 1234, then input #1234 and press SEND, the transmitter can also page the coaster No. 10. If page successfully as picture 2.
��©@00 ® Standard Guest Paging System User Manual ® ��©@00 Standard Guest Paging System User Manual means guest paging interface, 12:07 is time, NUM means to input number. E.g., No. 010 can be input as 10 ······· Display area or 010, then press SEND. If this coaster number is edited and bound together with the bill No., e.g, coaster No. 10 is bound with bill No. 1234, then input #1234 and press SEND, the transmitter can also page the coaster No. 10. If page successfully as picture 2.
® !¼l!¼l©@OO Standard Guest Paging System User Manual Standard Guest Paging System User Manual 2.2 Staff Paging Staff paging interface as picture 2.3, press 'F1 ' to switch staff/guest interface. 2.3 Single Key Paging Press F3 to enter single key paging interface, as picture 2.5. Use upper and lower key to check and read the single key message, input 0-9 to page the corresponding waiter/staff pager. Notes: Single key paging can only page the staff/waiter number but not the guest number. Picture 2.
® !¼l!¼l©@OO Standard Guest Paging System User Manual Standard Guest Paging System User Manual 2.2 Staff Paging Staff paging interface as picture 2.3, press 'F1 ' to switch staff/guest interface. 2.3 Single Key Paging Press F3 to enter single key paging interface, as picture 2.5. Use upper and lower key to check and read the single key message, input 0-9 to page the corresponding waiter/staff pager. Notes: Single key paging can only page the staff/waiter number but not the guest number. Picture 2.
® !¼l!¼l©@OO Standard Guest Paging System User Manual means bill No. paging, 00 is serial number, 010 is !¼l!¼l©@OO ® Standard Guest Paging System User Manual 2.5.1 Setup Time coaster pager number, the four digit after -# is the bill number, and Setup time interface as picture 2.7 the bill number has to be four digit. Use the key pad to input the time, use the left/right key 1. Edit bill No. to move the cursor and modify the data.
® !¼l!¼l©@OO Standard Guest Paging System User Manual means bill No. paging, 00 is serial number, 010 is !¼l!¼l©@OO ® Standard Guest Paging System User Manual 2.5.1 Setup Time coaster pager number, the four digit after -# is the bill number, and Setup time interface as picture 2.7 the bill number has to be four digit. Use the key pad to input the time, use the left/right key 1. Edit bill No. to move the cursor and modify the data.
��©@00 ® Standard Guest Paging System User Manual ® ��©@00 Picture 2.9 is to input the duty alert message, use the Standard Guest Paging System User Manual Notes: For this function, the second ID address has to be keypad to input the data and use the left/right key to move used, and it has to be matched with the guest group paging the cursor and modify the data. ID. 2.5.4 Modify Password Pre: Input current password, e.g. 1234 Now: New modified password, e.g.
��©@00 ® Standard Guest Paging System User Manual ® ��©@00 Picture 2.9 is to input the duty alert message, use the Standard Guest Paging System User Manual Notes: For this function, the second ID address has to be keypad to input the data and use the left/right key to move used, and it has to be matched with the guest group paging the cursor and modify the data. ID. 2.5.4 Modify Password Pre: Input current password, e.g. 1234 Now: New modified password, e.g.
® Q:JQ:J©@OO Standard Guest Paging System User Manual 2. Setup Interval Time for Ring T:_s is the ring time interval, unit is second, maximum 99s, this function will only work when N is setup as 0. ® Q:JQ:J©@OO Standard Guest Paging System User Manual T: _s means repage time interval, maximum 99s, 1s is recommended to be used. While the time interval for queuing paging is the same as this time interval setup. Use keypad 0-9 3.
® Q:JQ:J©@OO Standard Guest Paging System User Manual 2. Setup Interval Time for Ring T:_s is the ring time interval, unit is second, maximum 99s, this function will only work when N is setup as 0. ® Q:JQ:J©@OO Standard Guest Paging System User Manual T: _s means repage time interval, maximum 99s, 1s is recommended to be used. While the time interval for queuing paging is the same as this time interval setup. Use keypad 0-9 3.
® Q:JQ:J©@OO Standard Guest Paging System User Manual 7.DeleGuest ID Delete guest pager No. message 8.DeleStaff ID Delete staff pager No. message 9.Dele Okey ID Delete single key paging message 10.Dele Message Delete common message (currently can not be used) ® Q:JQ:J©@OO Standard Guest Paging System User Manual Picture 2.16 Edit Guest Paging ID 11.TestMode Test Mode 12.lnitialize Initialize all the data 13.
® Q:JQ:J©@OO Standard Guest Paging System User Manual 7.DeleGuest ID Delete guest pager No. message 8.DeleStaff ID Delete staff pager No. message 9.Dele Okey ID Delete single key paging message 10.Dele Message Delete common message (currently can not be used) ® Q:JQ:J©@OO Standard Guest Paging System User Manual Picture 2.16 Edit Guest Paging ID 11.TestMode Test Mode 12.lnitialize Initialize all the data 13.
Standard Guest Paging System User Manual 2.6.5 Test Mode In test mode, use left/right key to move the cursor, if ® (¼)(¼)@@00 Standard Guest Paging System User Manual 2.6.7 Send Mode Setup send mode as picture 2.21, use upper/lower key to choose N and press ENT, it will exit the current interface, if Y modify the mode, in total two modes: Internal and External. then press ENT, it will enter the test mode, as picture 2.18. The default mode is Internal.
Standard Guest Paging System User Manual 2.6.5 Test Mode In test mode, use left/right key to move the cursor, if ® (¼)(¼)@@00 Standard Guest Paging System User Manual 2.6.7 Send Mode Setup send mode as picture 2.21, use upper/lower key to choose N and press ENT, it will exit the current interface, if Y modify the mode, in total two modes: Internal and External. then press ENT, it will enter the test mode, as picture 2.18. The default mode is Internal.
® Q:JQ:J©@OO Standard Guest Paging System User Manual Picture 2.23 Linking Standard Guest Paging System User Manual Picture 2.26 Test mode 2. Modify Frequency After setup links successfully, it will come to the interface as picture 2.24, press the keypad 0-9 to input new frequency. The frequency range is 420~450Mhz. Please modify within this 14. Set. -Fre;=11_�enc: F ---�- 4· -:r-:r .-.c-,-11r.1 -·Et·11T'.
® Q:JQ:J©@OO Standard Guest Paging System User Manual Picture 2.23 Linking Standard Guest Paging System User Manual Picture 2.26 Test mode 2. Modify Frequency After setup links successfully, it will come to the interface as picture 2.24, press the keypad 0-9 to input new frequency. The frequency range is 420~450Mhz. Please modify within this 14. Set. -Fre;=11_�enc: F ---�- 4· -:r-:r .-.c-,-11r.1 -·Et·11T'.
® !¼l!¼l©@OO Standard Guest Paging System User Manual 3. FCC Important Note FCC Part 15.19 Warning Statement THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC Part 15.
G-:JG-:J©@OO Standard Guest Paging System User Manual &® Cl:JCl:J@roOO Beijing MMcall Electronics Co.,Ltd Add:7th Floor, C set Shangdi International Science & Technology Park Haidian District Beijing,China (100085) Tel:010-51663330 Web: www.mmcall.com Beijing MMcall Electronics Co.