User Manual Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
Contents 1. SUMMARY ................................................................................................................................................... 4 2. APPLICATIONS .......................................................................................................................................... 4 3. HARDWARE DESCRIPTION.................................................................................................................... 4 4. ACCESSORIES ..................
6.27.7 Movement alarm .......................................................................................................................... 16 6.27.8 Overspeed alarm .......................................................................................................................... 16 6.27.9 Fuel Alarm ................................................................................................................................... 16 6.28. ALARMS UNDER ARM STATE .......................
1. Summary 1.1 Working Based on existing WCDMA/GSM/GPRS network and GPS satellites, Set multiple functions of security, tracking, monitoring surveillance, emergency alarms and management,this product can locate and monitor any remote targets by SMS or internet. 1.2 Features 1.2.1 Built-in WCDMA/GSM, GPS antenna, compact, elegant appearance. 1.2.2 Support GPS and LBS (Location based service) double tracking solutions. 1.2.3 Support SMS/WCDMA/GPRS/Internet Network data transmission 1.2.
4. Accessories Name Specifications Applicable model Harness 12PIN Standard 2 Relay 12V/40A or 24V/40A Standard 3 siren 12V/24V Optional 4 Fuel sensor Optional 5 Remote control Optional for type G No.
5. Specifications Specification Content DIM 9.6×5.3×1.6cm Weight 70g Network WCDMA/GSM/GPRS Band WCDMA (3G): 850MHz/1900MHz/2100(only for CE) GSM (2G): 850/900/1800/1900MHz GPS sensitivity -159dBm GPS accuracy 5m GPS start time Cold status 45s Warm status 35s Hot status 1s Car power supply Back up battery 12 V -24V Chargeable 3.7V 350mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing 6. Operating Instructions 6.1.
Wiring diagram 6.1.5 Note: The pink wire can be connected to the original car horn; it can also be connected to the siren bought with the tracker. 6.1.6 Know about the type of the door trigger is positive or negative trigger. Please connect the green wire to the door control circuit if it is positive, and connect blue wire if it is negative. 6.1.7 Please install the SOS button on the place driver can touch. 6.2. SIM CARD Installations 6.2.
Blue LED: LED flashes for each second for normal reception, and flashes 3 times for each second (At least 4 satellites have a signal-to-noise ratio of 38 or more) No GPS reception, LED OFF. 6.5. Initialization Send SMS “begin+password” to the unit, it will reply “begin ok” and initialize all the settings to default factory settings.(default password: 123456) For example: send SMS “begin123456”, it will reply “begin ok”. 6.6. Change Password 6.6.1.
6.8.2. If you call it from authorized phone number, it will hang up and report a real-time location as below: *When lost fix to satellites, the message will includes the last known GPS position and the LAC code of current position as well. 6.9. Auto track continuously 6.9.1. Track with limited times upon time interval Send SMS command “fix030s005n +password” to the tracker device, it will report the latitude & longitude at intervals of 30 seconds for 5 times. (s:second, m:minute, h:hour).
6.10.3 The angle must be 3 digits Arabic numbers, default angle value is 30 degree. 6.11. GPS drift suppression 6.11.1 This function is deactivated by default, send "suppress+password" to tracker, it will reply" suppress drift ok". The GPS data stop updating if vehicle is not driving (ACC is OFF) and latitude and longitude always keep same, and GPS data updates automatically when vehicle is moving. 6.11.2 Cancel: send "nosuppress+password" to tracker, it will reply" nosuppress ok ". 6.12.
mode. 6.15. Data logging 6.15.1 Auto logging:When the tracker device lost GSM signals or fall offline from GPRS, tracker will log the tracking position and alerts automatically in the SD card on the basis of the pre-set condition, when GSM signals get back, all the event alerts will be auto-sent to the authorized numbers or web platform (server), but the logged tracking data should be loaded to the web platform via SMS command. 6.15.
And then send the code to carrier’s phone number, and forward the message from carrier to mobile phone number. Take china mobile for example, mobile users can send “ye” to china mobile number 10086, and 10086 will send user’s balance message to tracker, and then tracker forward the balance message to mobile phone number , following is an illustration how this function works.
adjust zero and reply “ oilzero ok!” . The fuel check is 0%. 6.21.3 Full calibration: Send “oilfull+password “ to tracker when the fuel tank is full , then tracker will adjust the full range and reply “ oilfull ok! “ . The fuel check is 100%. 6.21.4 Tracker can connect to car original voltage type fuel level sensor ranging from 0-5V. You can also connect add-on voltage type fuel level sensor if you cannot use the one of the original car. 6.22.
Send silent+password to tracker, it will reply silent ok! mode, Siren won’t be sound after alarm is triggered , but tracker will send alarm SMS to authorized number. Send disarm+password to quit ARM & silent mode. that means tracker enters ARM & silent 6.24.2 Set up silent mode by remote controller (Option for model G) Press in disarm state for 0.5 second, the siren will beep one time, the car will enter ARM & Silent mode.
6.27.2 External Power off alarm This function activates by default. Send “ extpower+password+space+on” to activate, it will send SMS “power alarm+latitude/longtitude” to authorized numbers every 3 minutes when external power is cut off. Cancel: Send SMS “ extpower+password+space+off” to deactivate it. 6.27.
6.27.6.2 Delete area Send SMS command:"noarea+password+space+area name” to tracker, it will reply:"noarea ok". 6.27.6.3 rename and set distance Send SMS command "rename+password+space+old name;new name,distanceM" to tracker, if name is not repeated and area doesn't cover others, it will reply "rename ok!" for successful configuration. Example: Send"rename123456 area01;school,800M", it means the new area name is "school", and covers area of a radius of 800 meters. 6.27.6.
the vehicle is stopped, the tracker will send "oil: xx% + Geo-info" to the authorized number at interval of 3 minutes. The siren beeps 20S. Cancel: Send SMS command “ nooil+password” to tracker. 6.28. Alarms under Arm State 6.28.1 Door Open Alarm The unit will send SMS “Door alarm+lat/long” to the authorized number at interval of 3 minutes when the door of the car opens in arm status. Siren will be sound for 20 seconds, and repeat sound at interval of 20 seconds if the door is always open.
6.29. Sleep 6.29.1 Sleep mode Send “sleep+password+space+on”, tracker device will reply “sleep on ok!”. If you didn’t operate the device in the last 5 minutes, there is no alarm being triggered, then it will enter sleep mode when vehicle stop running, GPS module will be turned off, call, SMS and Vibration can wake it up. And less gprs traffic function will be activated by default in sleep mode. GPRS disconnected and will be connected again when there is alarm event or when you start to drive the car.
6.32. Set up Terminal (local) Time Send SMS command “time+space+zone+password+space+time” to the tracker unit, If succeed, It will reply “time OK” For example: Send SMS “time zone123456 8”, 8 is Chinese time zone, If your country time zone is minus, send SMS “time zone123456 -8”. 6.33. Reset Hardware Send SMS “reset+password” to tracker device, it will reply “reset ok”. And the GSM module and GPS module in the tracker will be reset. 6.34.
In most countries, the user name and password involving GPRS login are not compulsorily necessary, therefore, the entry can be skipped. For those countries requiring user name and password, please configure as following: Send SMS “up+password+space+user+space+password”If succeeded, “user,password ok” is returned by the tracker in SMS.
6.38. Instructions for web platform and mobile APP Users need to register an account on www.gpstrackerxy.com before use web or APP platform, account name and password is the same on web/APP platform. 6.38.1 register an account 1.choose the right server to login in 2.Validate your IMEI is valid or not 3. Click "register". Pop-up a dialog box, register an account 6.38.2 Login 4. Input the newly registered user ID and password, click "login" 6.38.
5. add terminal 6. add terminal 7. enter IMEI 8. Device name 9.choose location icon 10. Save 11. the newly registered device is offline in grey color 6.38.4 Configure your tracker to web platform to track it online Step 1:set APN,refer to 6.35.1 Step 2:set GPRS user name and password,refer to 6.35.2 Step 3:set IP and port, please use the corresponding IP and port of the server you choose, refer to 6.35.3 Step 4:switch to GPRS mode,refer to 6.35.4 12.
6.38.5 If the tracker is always offline (grey color), make sure the SIM card subscribe the GPRS service, and have money to surf the Internet, you can use phone to test the SIM card can surf the Internet or not. please check the APN, user name, password, IP, port settings are correct, refer to 6.30. 6.38.6 IOS &Android mobile APP 6.38.6.1 Download and install the mobile APP software According to your phone type, download and install mobile app below the home page on web tracking platform. 6.38.6.
5. Click here to operate the device 6.38.6.3 login in and use the mobile APP under SMS version 2.Use”mc” as the initial user ID,password is 8888, change the user name and password after entry 1.Choose SMS LOGIN 3.
4.Choose “add device” 5. Filling the device name 6.Choose the type 7. Filling the SIM PHONE NUMBER of the device 8.Filling the tracker’s password 9.Click “ok” 10. Click the icon, and display the list 11.
13.Click buttons to send commands 14.Filling parameters manually and then click “send” 12.Click here to see more menu Remarks: “SMS login” version on Android phone can track the positions and show alarm on t he map; but "SMS login" version on IOS can only send commands due to the confined policy, it cannot track the positions and show alarm on the map. 7. Cautions Please comply with the instructions to extend the unit life: 1. Keep the unit dry. Any liquid, i.e.
8. Faults & the Solutions Faults Solution Fail to turn it on Please check if built-in battery is charged, and power wires connected well. No GSM signal Please check if SIM card installed correctly. Please check if SIM card is WCDMA/GSM network. Don’t turn on the PIN code no calls can be diverted Installed location should be unblocked to ensure to receive GPS signals.
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.