GPS Tracker User Manual Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
Contents 1 SUMMARY ................................................................................................................................................... 5 2 APPLICATIONS .......................................................................................................................................... 5 3 HARDWARE DESCRIPTION.................................................................................................................... 5 4 SPECIFICATIONS ...................
6.7 EXACT STREET ADDRESS ....................................................................................................................... 21 6.8 LOCATION BASED SERVICE (LBS) / CELL-ID TRACKING........................................................................ 21 6.9 AUTO ANSWER ...................................................................................................................................... 22 6.10 FORWARDING INCOMING SMS MESSAGES ...................................
6.28 ACTIVATE FUEL VALUE IN GPRS DATA .................................................................................................. 35 6.29 CONFIGURE SMS MANAGEMENT CENTER NUMBER ............................................................................... 36 6.30 CONFIGURE HEARTBEAT PACKAGE INTERVAL ........................................................................................ 36 6.31 INITIALIZATION .................................................................................
1 Summary This product is based on the GSM / GPRS network and GPS satellite positioning system. It integrates anti-theft alarm, positioning, first aid and tracking functions in a brand new product which can locate and manage remote targets through SMS text messages, mobile app and web platform. Features Built-in GSM, GPS antenna, small size, beautiful and elegant. Support GPS and LBS (Location based service) dual tracking solutions.
4 Specifications Product name Model DIM. Weight Network LTE wireless data terminal 403 9.6×5.3×1.8cm 70g GSM/GPRS/LTE Band 4G 2G GPS sensitivity GPS accuracy -165dBm 5m Time To First Fix Cold status 45s Warm status 35s Hot status 1s Applicable car power Battery Storage Temp. Operation Temp. Humidity (B1/B2/B3/B4/B5/B7/B8/B20/B28) (1900/1800/900/850 MHz) 12V-24V Chargeable changeable 3.7V 350mAh Li-ion battery -40°C to +85°C -20°C to +55°C 5%--95% non-condensing 5 Start to use 5.
Wiring Diagram The pink wire can be connected to the original car alarm horn or the alarm horn purchased together. Understand that the vehicle door trigger type is positive trigger or negative trigger. Connected to the green wire if it is positive trigger, and connected to the blue wire if it is negative trigger. Please install the SOS button where the driver can touch it. 5.2 SIM card installation Open the rubber plug of the SIM card slot and insert SIM card.
5.3 Turn on the device Connect the positive and negative (red and black) wires of the power supply to the 12V or 24V power supply of the car. Wait the device works normally After 1 minute of power-on. 5.4 Device status light Red light: Always on when charging, and turns off after being fully charged. Red light flashes quickly when battery is low. Green light: Flashes every 1 second when GSM network signal normally, flashes every 3 seconds when works in GPRS mode; always on when no GSM network.
Example: APN123456 CMNET Note: 123456 is the default password, please change password on APP or refers to 6.1. CMNET is the APN of China mobile. 5.5.2 Configure user name and password of GPRS In the most countries, the user name and password of GPRS are not necessary; therefore, you can ignore this step if it is not necessary for your local network.
5.6.2 Register 5.6.2.1 Open BAANOOL IoT, register a new account and login. Input phone number Input correct country code, otherwise, no way to get verification code Input the calculation result.
5.6.2.2 Choose BAANOOL IoV to enter it. 5.6.3 Bind device Click “Me” “Device Management” “Add”, scan the QR CODE on the device or enter the IMEI manually to bind the device. Scan QR CODE or enter the IMEI number Click to add the device 5.6.4 Position 1.
devices on the map, click the icon of the device to see the details including latitude & longtitude, speed, altitude, time, ACC status, door status, and alarm status, etc. and you can click “Navigate” to navigate you to that car. 2. Select the device: Click “≡” at the upper left corner to select a device, Then its position, Geo-fence and trace (need to configure the “continuously track” settings of the “Control” page) will be showed on the map. Select the device 5.6.
Select a device Geo fence Click to check the Geo-fence Create a new Geo-fence 5.6.6 Device management After selected the device, click “Me” to management page to add device, change device’s information, delete settings, group management and sub-account management.
5.7 BAANOOL IOT’s Web Version Account name and password are the same on mobile App and web version 5.7.1 Register Open http://www.baanool.net to register a new account.
Click to register Enter IMEI, account, password, mobile phone No. (For forget password purpose) to finish the registration.
5.7.2 Login Enter your account and password to login 5.7.
Enter IMEI Device name Choose an icon for device Click to save it This device you just added is still offline If the device is always offline (Grey color), please make sure the SIM card subscribes the GPRS service, and have credit to surf the Internet, you can put the SIM card in the phone to test if it can surf the Internet. Besides, please also check if the configurations of APN, user name & password are correct, refers to section 6.27 for more information.
the tracker cannot recognize it. When reading this user manual, you will notice that we have used "+" and "space" between some words;"+" between two words means they should be written together as one word and "space" between two words means you should leave one character space between two words. 6.2 Authorization The authorized numbers are used to receive the various alerts, such as SOS, Geo-fence and movement alert, etc. Up to 5 numbers can be authorized.
If you call it from authorized phone number, it will hang up and report a real-time location as below: When it lost fix to satellites, the message will include the last known GPS position and a LAC code of the updated position as well. 6.4 Continuous interval tracking 6.4.1 Limited times tracking at a time interval SMS command: fix030s600s005n+password Tracker response: It will update positions at 30 seconds interval when ACC ON and 600 seconds when ACC OFF for 5 times.
6.4.3 Unlimited times tracking at a distance interval SMS command: Distance+password+space+distance value Tracker response: Distance ok Example: Distance123456 0050 Note: The distance unit is meter, and value must be 4 digits. 6.4.
6.6 GPS drift suppression This function is activated by default. SMS command to activate: suppress+password Tracker response: suppress drift ok Example: suppress123456 If you stop driving the vehicle, tracker will stop updating its position and keep sending the same latitude and longitude, and when start to driving, the latitude and longitude will update automatically again. SMS command to deactivate: nosuppress+password Tracker response: nosuppress ok Example: nosuppress123456 6.
6.9 Auto answer Track is the default mode for position. SMS command to switch to auto answer mode: autoans +password Tracker response: autoans ok! Example: autoans123456 Note: If there aren’t any authorized numbers set-up, it will auto answer for all the incoming calls, if there are authorized numbers set-up, it will auto answer the incoming calls from authorized numbers and reject all other phone numbers.
number, which is 10086 in this example of China Mobile. Received and execute Mobile balance123456 10086 ye Forward balance message to mobile phone Tracker Send ye out to 10086 Received Balance message Send balance back 10086(China mobile) Received ye from number in the tracker and process 6.12 ACC ON/OFF Alert This function is OFF by default.
20KM/H. SMS command: noquickstop+password Tracker response: noquickstop OK Example: noquickstop123456 Remote immobilizing SMS command: stop+password Tracker response: Stop engine succeed Example: stop123456 Once the immobilize function has been executed, it will remain immobile until you send command to resume the fuel supply Remote fuel resume SMS command: resume+password Tracker response: Resume engine Succeed Example: resume123456 This means tracker will now resume the fuel & power supply. 6.
6.15 Configure times of alarm SMS The times of the message of a continuous alarm can be configured. 3 times messages by default. SMS command: xtime+password+times value Tracker response: xtime ok! Example: xtime123456 005 (It means to send messages 5 times.) Note: The times value must be 3 digits. 6.16 Alarms 6.16.
6.16.3 Blind area alarm This feature is deactivated by default, tracker will send SMS notification “No gps+latitude & longtitude of the last know position.” to authorized numbers if lost fix to GPS satellites. SMS command to activate: gpssignal +password+space+on Tracker response: gpssignal on ok Example: gpssignal123456 on SMS command to deactivate: gpssignal +password+space+off Tracker response: gpssignal off ok Example: gpssignal123456 off 6.16.
Note: The first latitude & longitude is coordinate of the top left corner of the Geo-fence, and the second latitude & longitude is the coordinate of the bottom right corner. To configure the Geo-fence the tracker must fix to satellites and be stationery for about 3-10 minutes. 6.16.6 Movement alarm The movement feature will create a circle area with a set radius (200 meters by default).
6.16.8 Fuel alarm When the vehicle's fuel consumption exceeds the normal standard while the vehicle is running, or there is fuel leakage or fuel stealing when the vehicle is stopped, tracker will send "oil: ××%+latitude & longitude" to the authorized numbers every 3 minutes. The siren will beep for 20 seconds. SMS command to stop the notification: nooil+password Example: nooil123456 6.
enter into arming state too, and will reply “set up fail! pls close the door” 6.18.2 Arming with remote control (For B model) Press key for 0.5 seconds, the car enters into arming state and the siren will beep one time, no SMS message notification. If you leave the ignition on (The ACC is on the ON position), tracker cannot enter into arming state, and siren doesn’t sound.
Example: disarm123456 After disarming, the door, shock sensor and ACC alarm will be deactivated, and these alarms won’t be triggered any more. 6.20.2 Disarming with remote control (For B model) Press on for 0.5 second, tracker will enter into disarming state, siren beeps two times, no SMS message notification. 6.21 Alarm function in arming state 6.21.
There are three different levels. First level: Alarm will be triggered by slight vibration. SMS command: sensitivity+password+space+1 . Tracker response: sensitivity ok Example: sensitivity123456 1 Second level: Alarm will be triggered by medium vibration. SMS command: sensitivity+password+space+2 Tracker response: sensitivity ok Example: sensitivity123456 2 Third level: Alarm will be triggered by severe vibration.
6.22.2 No sleep mode SMS command: sleep+password+space+off Tracker response: sleep off ok Example: sleep123456 off Tracker does not sleep, GSM and GPS work at all times. (Default mode) 6.23 Check Status SMS command: check+password Tracker response: Power: ON/OFF Battery: 100% GPRS: ON/OFF GPS: OK/NO GPS ACC: OFF/ON Door: OFF/ON GSM Signal: 1-32 (The higher, the better) Oil: 100% APN: cmnet IP: 104.250.138.146 PORT: 9000 Arm: OFF/ON Example: check123456 6.
SMS command: time+space+zone+password+space+time zone value Tracker responds: time ok Example: time zone123456 8 Note: 8 is the time zone of China, If your country time zone is minus, write the time zone value with a “-“ symbol, for example, time zone123456 -8. 6.26 Reset Hardware This command will reboot the GSM and GPS modules of the tracker. Please note this will not restore factory settings. SMS Command: reset+password Tracker Response: reset ok Example: reset123456 6.
password on App or refers to section 6.1. 6.27.1.2 Configure user name and password In the most countries, the user name and password of GPRS are not necessary; therefore, you can ignore this step if it is not necessary for your local network.
6.27.3.1 GPRS mode SMS command: GPRS+password Tracker response: GPRS OK! (It means it has been switched to GPRS mode.) Example: GPRS123456 TCP / UDP switch TCP mode is the default one; you don’t need to configure this step if the web platform works with TCP mode, but you need to configure it as following when you are using a platform which only works with UDP.
SMS command: protocol+password 12 Tracker response: protocol 12 ok Example: protocol123456 12 Note: By default, tracker is connected to tracker.baanool.net:8090 with fuel value, so no need to configure this step. If you are using another IP or domain name, use this command to activate the fuel value. 6.
return to default factory settings. SMS command: begin+password Tracker response: begin ok Example: begin123456 7 Cautions Please be sure to follow when using: 1. Keep the tracker used in a dry environment. The humid environment can easily damage internal circuits. 2. Please do not put it in a dusty environment. 3. Do not put the tracker in overheated or overcooled places. 4. Handle carefully. Don’t vibrate or shake it violently. 5. Please clean with a dry cloth, do not use chemicals and detergents. 6.
No alarm notification message 1. Authorized number has not been set up. 2. The format of the phone number is incorrect. Fail to stop engine 1. Please check whether the engine stop wiring connected correctly? 2. Please check whether the speed is higher than the speed to execute the stop command when using Delay execution way? Remote control cannot be used Turn off tracker, and turn it on to program the remote control again.
FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.