Pet GPS Tracker User Manual
1、 Hardware Description Front view Rear view Electrode Microphone Left side view Right side view ON / OFF button Indicator Speaker SIM Card slot Charging port
2、 Specifications Product name Model Weight Network Wireless Data Terminal (Pet GPS Tracker) GPS-201/BN-201 52g GSM/GPRS/NB Band 2G NB GPS sensitivity GPS accuracy -162dBm 5m Time To First Fix Cold status Warm status Hot status Charging input DC 5V 300mA Battery Standby Storage Temp. Operation Temp. Humidity IP rating Chargeable changeable 3.
Note: If you can’t turn it on, the device may be out of power. Please plug in the included data cable to charge. “If consumers use the power adapter for charging, they should purchase the power adapter that meets the power requirements of the corresponding safety standards or the CE certified power adapter” 4、 Work status indication GPRS online: Blink each 10 seconds; GPRS offline: Blink each 5 seconds. Fixed to satellites: Double blink.
.1 Configure APN by SMS command (2G network) APN is an abbreviation for Access Point Name and changes depending on which mobile network you are using. For more information about your local APN, please check with your local wireless carrier. SMS command: APN+password+space+local APN Tracker response: APN OK Example: APN123456 CMNET Note: 123456 is the default password, it can be changed by SMS command: password+old password+space+new password 5.
、 Download and install mobile APP 6.1 Scan the QR code to download APP Search “BAANOOL IOT” in Google Play / App Store to download.
8、 Login Enter the account, password, log in and select "BAANOOL PET". 9、 Bind device 9.
9.2 Find the barcode on the back of the device and scan the barcode to bind the device 9.3 You can also directly enter the IMEI to bind the device. 9.4 If the binding is successful, please complete the pet information, and click Back to return to the home page 9.5 Home information 10、 Yell Click “Yell” on the homepage to enter the shouting interface. You can record the voice and send it to the bound device immediately. The device will play it immediately after receiving it.
will prompt the user to listen. 12、 Go home Click “GoHome” on the homepage to issue a command, and tracker will actively play the recorded voice after receiving the command. For the first time, if you didn’t record the voice, APP will prompt users to add the voice. Click “Add Voice” to enter the voice list interface, and click “Record Voice” to start recording voice. 13、 Punish Click “Punish” on the homepage to pop up the punishment interface. When pets make mistakes, they can be punished appropriately.
16.1 Geo-fence Tap the switch to turn on or off the geo-fence. Click Geo-fence to enter the settings. When the device triggers the fence, the APP can receive a Geo-fence notification. Note: The power consumption of pet tracker will increase if turn on the Geo-fence. 16.2 Report loss Tap the Report loss switch to turn on or off it. When turned on, the pet tracker will report the latest position every time it is turned on 16.3 Local time The pet tracker will automatically obtain the local time zone.
FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.