User Manual 1) Device layout
Power button: Switch device on/off SIM Card slot: Insert nano-sim card TYPE-C connector: To charge this device Headphone jack: 3.
2) Power ON/OFF Power ON: Press and hold the "Power button" for 2 seconds. The screenlights up and the animation on screenindicates that the device is turned on, system will boot to MSA User Interface. Power OFF: Press and hold the "Power button" for 2 seconds, the screen will show "Shutdown" or "Restart". Select "Shutdown", the screen turn off indicates that the machine has been shut down. Restart: Press and hold the "Power button" for 2 seconds, the screen will show "Shutdown" or "Restart".
) Voice Translation Select"Voice Translation" feature and choose the languages to be translate. Press and hold the "Translation button" to speak, and release the button after speaking, the screen will display the original text, translate it into the corresponding language, and broadcast the translated language. Click on the "small speaker" icon of the translated sentence to listen to the translation again.
To join the lecture: Enter the number corresponding “Room number”, click "Join" button, select your own language, check the correctroom number shown on the top left corner, and you have successfully joined the lecture. The device used to createand start a presentation room is the “default speaker”, and ONLY this device can perform voice input. Press the "Translate button" on the side to start recording, the speaker can start speaking, and the device recognizes and translates.
8) Settings To Adjust the volume: Drag the Volume bar left or right to adjust your desired volume level. To Adjust the brightness: Drag the Brightness bar left or right to adjust your desired brightness level. To Change the system language: Select “System Language”, and then choose your language needed. Currently only supports Simplified Chinese, Traditional Chinese, English, Japanese and Korean. ToUpdate: Select "Check Version", and the system will automatically search for a newer version.
-Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: SAR tests are conducted using standard operating positions accepted by the FCC with the Mobile Assistant transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the Mobile Assistant while operating can be well below the maximum value.