Specifications

Bluetooth Speaker BT-1908
FEATURES:
1. Outdoor HiFi Wireless BT Speaker with double 4inch subwoofer.
2. Output power is strong, you can enjoy your music anywhere
3. BT 5.0 with lower power consumption and over 10m meters operating range.
4. Support USB and Micro-SD card and AUX and FM Radio, and TWS function.
5. Support wired microphone give you experience the singer's feeling.
6. Colorful LED lights looks more beautiful.
7. With Strap, easy to take out, wherever beach, garden, party, outskirts etc.
SPECIFICATION:
Speaker Type
2 x 4inch
POWER WATTS/RMS Power
10W
HERTZ /Frequency Response
150Hz - 18KHz
Signal to Noise Ratio
≥80dB
Woofer
Full Range Frequency Speaker
Tweeter
BT Version
V5.0
InPut Specs
DC 5V, 1A
Output Voltage
3.7V
Battery
1200mAh
Illunimation
LED Flashlight
Display
LED Display
Connections
BT/Micro SD/USB/FM/AUX/MIC
Unit Measures (mm)
380 x 211 x 148
Unit Weight (kgs)
1.30
Accessories
Remote Control, Charing Cable, Audio Cable, Strap
MANUAL
1. BT Mode:
a) BT Version: 5.0, with lower power consumption and over 10m meters operating range.
b) ON/OFF, after the power is turned on, the display “BLUE” flashes and the speaker emits a BT mode tone.
c) The “BLUE” character flashes into the pairing state, open the phone BT, search for the device name, click the device name to
confirm and then connect. After the connection is successful, “BLUE” is always on, and the speaker sends a pairing success
tone. The “BLUE” character is displayed during playback, and the “PAUS” character is displayed when paused.
2. TF/Micro SD Card Mode:
a) When the speaker is not plugged into the TF card device, it will boot into the BT mode. Inserting the TF card speaker will
automatically detect the TF card playback mode, displaying ‘PLAY’ and playback time. If the speaker has a TF card device, it
will enter the TF card mode directly after booting.
b) The display shows the playback time during playback, and “PAUS” character are displayed when paused.
3. U Disk Mode:
a) When the speaker is not plugged into the U disk, it will boot into the BT mode. Inserting the U disk, speaker will automatically
detect the USB playback mode, displaying ‘PLAY’ and playback time. If the speaker has a U disk, it will enter the TF card
mode directly after booting.

Summary of content (2 pages)