4K UHD 2160P Dash Camera User Manual
1.
■ UP/WIFI Setting interface: menu UP function Press UP button for 3 seconds to turn on or off WiFi.
2.
left corner of the screen shows the photo icon .
4.
(2) Enter the phone WLAN settings interface, find the camera WIFI such as: NVT_CARDV******, enter the password to connect, WIFI initial password is: 12345678 (3) After the phone and recorder interconnection successfully, you can open the APP to view the real-time screen or recorded video and pictures.
■ Video preview When the APP is successfully connected to the recorder, the recorder in the state of stop recording, click the "folder" menu, click to play one of the videos (Note: direct preview will have video progress buffer) ■ Download click" "，to download the video to the phone click" "，to to see the pictures Note: The video played back by the mobile phone is compressed.
(4) When playback the video on the phone, it will play the GPS tracking information (5) The GPS module with tape on this side must be attached to the front windshield so as to receive a stable signal.
(3) Rear camera should be installed near the license plate. Both the rear viewing and reverse guidance images are sharp and clear. To use the reversing function, please install the rear camera in position 6. Basic settings (1) Resolution: The default video resolution is: 3840*2160+1920*1080 25P The menu also contains 2560*1440+1920*1080 30P and FULL HD, select the corresponding resolution and click OK to switch the resolution.
(3) WDR: default is "On", which means it automatically captures more light and adjusts brightness to produce clear, color-accurate videos and pictures even in low-light conditions (4) G-sensor: the default setting is "medium", which corresponds to the sensitivity of the vibration when the file is locked (5) EV Exposure: default is +0.0, with various options available in the menu (6) Record Audio: The default setting is "On".
Select "1 minute", that is, the display will enter the screen saver black mode after 1 minute (13) Beep Sound: default is "On", that is, to open the key sound (14) Language: default language "English", there are multiple languages in the setting menu (15) GPS: Select "On" to display the GPS symbol icon on the screen, select "Off" to close the GPS symbol icon on the screen (16) Timezone: default time zone is GMT +8:00, the menu can choose the global time zone (17) Speed Warning: The default is 100km/h, you
7. Parameters CPU NOVATEK NT96670 Imagine sensor SONY STARVIS CMOS Display 3.
8.
256GB class 10 U3 or above TF card) (3) because the recorder for true 4K pixels, when playing the recorded video on the computer or TV, please download the 4K special player, it is recommended to download PotPlayer and VLC media player. (If you use a player that does not support 4K video playback, it will cause the video screen lag.
to record the file.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
