Getting Started Guide

V380 Pro
Intelligence, technology, security
When you unbox the device, your first step should
be to use the included AC adapter and Micro-USB
cable to plug your V380 camera in, and follow
these steps to complete your setup.
Note: The camera requires a SD card to store video recordings,
accessories do NOT include any SD cards, please purchase
one separately.
Scan the below QR code with mobile phone to
download“V380 Pro”, besides, it's available to install
"V380 Pro" through Google Play Store or App Store.
Getting started
Once the camera is power on, follow the
steps below to complete the setup:
A.AP quick configuration
B.AP Hot spot configuration
1. Tap”+“ and then tap ”Next“.
2. Wait until you hear “Access-Point established”
or “Waiting for WiFi smartlink configuration”,
now you can start connecting the camera to Wi-Fi.
3. If you hear the camera voice prompt
"Access-Point established", choose method A or B
to configure the camera.
4. If you hear the camera voice prompt“Waiting
for WiFi smartlink configuration”, choose method
C to configure the camera.
Android:
Tap “Access-Point established”, MV+ID will be
shown, tap it to proceed.
Choose your Wi-Fi network, enter the password,
tap “Confirm”, and the camera will start
connecting Wi-Fi.
Once you hear the camera voice prompt “WiFi
connected”, it will be shown on device list.
The last step for setting up your camera is to set
a password for the camera.
iOS:
Tap “Access-Point established”, go to your
Phone settings, tap “Wi-Fi” and connect
“MV+ID”.
Wait for the status bar to display “wifi” icon,
and then return to the App, tap “Next”.
Go to your phone settings, tap “Wi-Fi” and
connect “MV+ID”.
Wait for the status bar to display “wifi” icon,
and then return to the App, pull down the device
list, the device will be shown on the list.
You are now able to view live stream on LAN, but
in order to achieve remote view, you need to
proceed the following steps:
Tap“setttings”—“network”—“change to
wi-fi station mode”, then choose your Wi-Fi
network, enter the password, tap “confirm”,
and the camera will start connecting Wi-Fi.
Once you hear the camera voice prompt “WiFi
connected”, the camera is ready to use.
Choose your Wi-Fi network, enter the password,
tap “Confirm”, and the camera will start
connecting Wi-Fi.
Once you hear the camera voice prompt “WiFi
connected”, it will be shown on device list.
The last step for setting up your camera is to set
a password for the camera.