Operation Instruction

Shenzhen skyworth RGB electronic co., LTD.

Model: HS-8902

Dear customer, thank you for purchasing skyworth products. I

will give you some information about this product.

This product meets the Bluetooth Version 5.0 specification.

Speech recognition performance can reach more than

95%(7M). Bluetooth remote control is over 15 meters away.

Vertical infrared remote-control distance of 8 meters.

Battery you need: 2*1.5 V AAA size.

The usage of this product is as follows:

1. Turn on the TV ac, press the standby button on the remote

control.

2. Long-press the composite key“home + left”on the remote

control until the light flashes.

3. Keep the remote control within one meter of the TV.

4. Facing the TV, press the Google button.

5. The remote control is paired with the TV via Bluetooth. The

TV screen pops up a pairing prompt.

6. Start using the product.

Television system has the memory function, for the first time

to use should be according to the above steps, later need not

PAGE 1
Shenzhen skyworth RGB electronic co., LTD. Model: HS-8902 Operation Instruction Dear customer, thank you for purchasing skyworth products. I will give you some information about this product. This product meets the Bluetooth Version 5.0 specification. Speech recognition performance can reach more than 95%(7M). Bluetooth remote control is over 15 meters away. Vertical infrared remote-control distance of 8 meters. Battery you need: 2*1.5 V AAA size. The usage of this product is as follows: 1.
PAGE 2
operation, boot automatically connected. If you need to reconnect, need according to the above steps again. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 3
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.