Install Instruction

Reset

If you want to reset the device,should be operation as follow

STEP 1.power off the device

STEP 2.connect power and cut off it 3 times(even operation

should be more than 2 second)

If you want to share the device to other people,the operation

is as follows STEP 1.Open Device Settings in APP, and click

the device you are currently using to enable remote Settings.

STEP 2.Go to Device Information and click Share Device.Add

a share and enter the email address for the share

（

POWER SATION INSTALL INSTRUCTION

1. SCREW 2. DC HOLE

3. NUT 4. DC WIRE

INSTALL STEP

1.PUT THE POWER SATION ON THE NUT

2.TWIST THE NUT(3) WITH SCREW(1)

3.CONNECT THE DC WIRE(4)WITH DC HOLD

④

①

②

③

85x130mm

INSTRUCCIONES DE INSTALACIÓN DE

LA CENTRAL ELÉCTRICA

1. TORNILLO 2. AGUJERO DC

3. TUERCA 4. CABLE DE CC

PASO DE INSTALACIÓN

1.PONER LA CENTRAL ELÉCTRICA EN LA TUERCA

2.GIRRE LA TUERCA (3) CON TORNILLO (1)

3.CONECTE EL CABLE DC (4) CON DC HOLD

Funcion de carga inalambrica de 5v-1A

PAGE 1
85x130mm POWER SATION INSTALL INSTRUCTION ① ② ③ ④ 1. SCREW 2. DC HOLE 3. NUT 4. DC WIRE 5 INSTALL STEP 1.PUT THE POWER SATION ON THE NUT 2.TWIST THE NUT(3) WITH SCREW(1) 3.CONNECT THE DC WIRE(4)WITH DC HOLD Reset If you want to reset the device,should be operation as follow STEP 1.power off the device Share If you want to share the device to other people,the operation is as follows STEP 1.Open Device Settings in APP, and click the device you are currently using to enable remote Settings. STEP 2.
PAGE 2
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.