Star Night Light Projector User Manual
Basic Safety Instructions In order to avoid the risk of electric shock, fire or personal injury, please read this manual carefully before using this machine, and keep it for future reference.The Star Night Light Projector could be only used for indoor. Please do not use it outdoor or the projector light may be damaged by rain or water. If the equipment is damaged, please contact the seller immediately for repair. Please do not disassemble the product by yourself.
Structure introduction 1、Main Power Switch 2、Power Indicator 3、Type-C Charging Port 4、TF Card 5、Button Area 6、Star Laser Area 7、Cloud Light Projection Area 8、Moon Light Projection Area
Product Operation Instructions 1. Bluetooth mode Turn on the product, and you will hear the voice prompt “Bluetooth Mode”, turn on your phone “Bluetooth” and search for the Bluetooth Name “W3A”, connect to it. Once the Bluetooth is connected successfully, you will hear the voice prompt “Bluetooth Connected”. Once the phone Bluetooth is disconnected, you will hear the voice prompt “Bluetooth disconnected”.
APP Download Method Method 1: Download APP, search “Tuya Smart” from App store or Google play. Method 2: Scan the QR code below to download the “Tuya Smart” app.
How To Use APP Step1. Register or log in. Step2. After connecting to WIFI, add device (Add Manually / Auto Scan).
Method 1: Auto Scan Step1: Choose to Auto Scan (note, confirm to open the location permission and Bluetooth and WIFI). Step2: Connect the Star Night Light Projector to the power supply, long press the button on the Star Night Light Projector for about 5 seconds to enter the network configuration state, and the blue breathing light will prompt.
Step3: When the Star Night Light Projector icon appears, and then clicking Next.
Step4: Select WIFI, enter the password, and then clicking Next. Step5: When paired successfully, the indicator light stops flashing and the light appears on the interface.
Method 2: Add Manually Step1: Connect the Star Night Light Projector to the power supply, long press the button on the Star Night Light Projector for about 5 seconds to enter the network configuration state, and the blue breathing light will prompt.
Step3: Check (Confirm the light is blinking rapidly), and then clicking Next.
Step4: Select WIFI, enter the password, and then clicking Next.
DANGER
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.