E01003 USER MANUAL IMPORTANT ○ Before using the product, please carefully read this manual and strictly comply with the operating instructions. ○ Do not attempt to disassemble, modify or repair the aircraft. If necessary, please contact your local retailer. ○ All the contents of this manual are subject to change without prior notice.
E01003 USER MANUAL I. Important Notice 1. Flight Safety Instructions (1) This product is not a toy, not intended for children under 14 years. (2) Please familiarize yourself with the relevant local laws and regulations. And keep away from any non-flight zones. (3) Please keep the aircraft within visual line of sight. DO NOT fly over obstacles, otherwise the drone may lose control and have serious damages.
E01003 USER MANUAL (2) Do not use other batteries but the specific battery. Other batteries may cause damage to the product or flight failure and even accidents. For replacement, please contact the local retailer for additional information. (3) Do not use batteries if they are dilatant or leaking, or the package damaged. If any of such battery problems occur, please contact the retailer or distributor. (4) Do not strike the battery against hard surface. Do not put objects over the battery or the charger.
E01003 USER MANUAL 4. Disposal (1) Please completely discharge the battery and put the unusable batteries into the designated container. The battery contains electronic elements. Do not deal with the related equipment as daily rubbish. (2) If the battery has become unusable after discharging, please dispose it properly according to the local garbage disposal method. 5. Maintenance (1) Do not use the charger when the temperature is too high or too low.
E01003 USER MANUAL V. Know E01003 The EC1003 is a 5GHz UAV remote control for the company's DF series. Use this remote control to control the aircraft to achieve one-button take-off and landing, one-button return, switch flight mode, control on-board camera and camera. EC1003 has built-in 18650 lithium battery, which has the characteristics of long use time, convenient charging and safe use. 1.
E01003 USER MANUAL ▂▂▂▂▂▂▂▂▂▂▂▂ Solid red Null ▂▂ ▂▂ ▂▂ ▂▂ Solid green Beeps BB-BB-BB Remote controller off if not in use for 5 minutes. Error. 3) Mode status indicator light Indicator Light Sound Status Indication ▂▂▂▂▂▂▂▂▂▂▂▂ Solid green No Position Hold Mode ▂▂▂▂▂▂▂▂▂▂▂▂ Solid red Null Altitude Hold Mode 2. Battery charging for remote controller Long press the power switch for 2 seconds to power on the remote controller.
E01003 USER MANUAL the remote controller ready before flight 4. Switch Between Mode 1 and Mode 2 a a c b b c (1) Switch to Mode 2 Toggle the left joystick a to the lowest position and press the "One Key Takeoff/ Landing" button b at the same time. Then turn on the remote controller c. Release the joystick a and the button b to enter Mode 2. (2) Switch to Mode 1 Toggle the right joystick a to the lowest position and press the "Photo/ Video" button b at the same time.
E01003 USER MANUAL 4) Land Do not land near crowds of people or obstacles. Choose a wide open space as the landing site and control the drone to hover over the landing site before proceeding to make it land. ○ Method 1: Manually control it to land Slowly toggle the throttle joystick to control the aircraft to land. When the aircraft lands on the ground, continue to toggle the joystick towards the lowest position until the propellers stop rotating.
E01003 USER MANUAL 6. Photo and Video During the flight, press the "Photo/ Video" button to take photos or videos. 短按拍照 长按开始 / 停止摄像 Short press the " " Photo/ Video button. And the remote controller beeps, indicating that you have successfully taken a photo. Long press the " " Photo/ Video button. And the remote controllers beeps B-B with the icon on the APP changing from white to red, indicating the camera has been ready for video shooting. Long press the button again.
E01003 USER MANUAL 8. Return To Home In GPS positioning mode, you can press the " " One Key Return button to return the aircraft. Do not control any functions during the process of return or ascent. When the aircraft is landing, you can toggle the joystick to control it to land on your desired location. When the aircraft is returning to home point, long press the " " One Key Return button to exit auto return mode.
C-Fly Technical Support Dear Customer, Thank you for choosing C-Fly product. Please visit C-Fly official website for more FAQ and information. If there is any problem of using our product. Product Operation: Please visit C-Fly College for tutorial video or user manual. Product Features: Please refer to product page description or product brochure. After-sale Service: Please refer to conditions and terms of after-sale service. The final interpretation right belongs to all C-Fly .