User's Manual

ManualsBrandsShenzhen Bondidea Technology ManualsComputers & Accessories2.4G Wireless Mouse

REV：A0 BD-8508G User manual Page 1 /5

Shenzhen bondidea technology co.,limited

Model ： BD-8508G

Specification： USB 1000-1600DPI

Description ： 3D6K Optical Mouse

Approved： Checked： Made：

Product Features

1． Adopt 2.4G bidirectional transmit technology, Super anti-interference；

2． 1600 DPI High resolution, accurate position；

3． Ensure you of working 360 degrees freely and say goodbye to wire.

4． No need code intelligence connection technology.

5． Nano receiver, built-in mouse, very convenient.

6． Special DPI key, switch between 1000-1600 DPI.

7． Low-Voltage indicator function, audit battery capacity at any time (when LED indicator flickering, it means low voltage)

8． Power on –off design, Turn off the mouse power, it can prolong batteries life when no use .

9． Main size: 98.5*62*34 mm

System Compatibility

1. Operation Systems Windows 98/ME/ 2000/XP/Vista/Win 7

2. Interface one of USB interface which is not occupied

Technical Parameters

Mouse:

A、Rating working voltage 3V

B、Rating working current 15mA

C、Maximum acceleration 8G

D、Resolution 1000-1600DPI

E、Wireless working channels 16 auto frequencies

F、Working frequency 2.402-2.480GHz

G、Working distance 8-10 meters

Receiver:

A、Rating working voltage 5V

B、Rating working current 20mA

USER MANUAL

Summary of content (5 pages)

PAGE 1
Shenzhen bondidea technology co.,limited USER MANUAL Model ： Specification： BD-8508G USB 1000-1600DPI Description ： Approved： 3D6K Optical Mouse Checked： Made： Product Features 1． Adopt 2.4G bidirectional transmit technology, Super anti-interference； 2． 1600 DPI High resolution, accurate position； 3． Ensure you of working 360 degrees freely and say goodbye to wire. 4． No need code intelligence connection technology. 5． Nano receiver, built-in mouse, very convenient.
PAGE 2
Shenzhen bondidea technology co.,limited Pull out the receiver and the battery installation steps 1． Prepare one pair of new AAA battery 2． Use your thumb fastens the battery cover and push backward of the mouse. Take out the battery cover is OK. 3． Put the batteries into the battery cell according to the right pole. (Please don’t install in the opposite pole , or it will harm the mouse ) 4． Install battery cover is OK.
PAGE 3
Shenzhen bondidea technology co.,limited Power switch Picture 3 Picture 4 3．Please insert receiver into the computer USB port , as picture four shows:。 4. System installs the software automatically, ５．Appears the right pictures, congratulations, you can use the mouse now Low voltage alarm function When the working voltage is 2.0~2.2V，Red Low-Voltage LED will flickering during your working time. It remind you to replace battery.
PAGE 4
Shenzhen bondidea technology co.,limited Attention 1． To achieve optimal effect, keep the receiver 20 cm away from computer display and peripheral equipment 2. Please don’t mix the different of the batteries when using, also don’t mix the same battery for old or new. 3. It can prolong the batteries life if you use the mouse on the white surface. 4. Auto-sleeping and power-saving function, it will be auto-sleeping without operation within a long time, press any key or scroll wheel to activate it. 5.
PAGE 5
Shenzhen bondidea technology co.,limited FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.