Data Sheet

ManualsBrandsShenzhen BOJINGnet Technology ManualsElectronicsBOJINGnet L107 IOT Router Module

BOJINGnet_L107_Datasheet_v1.1

深圳市博晶网络科技有限公司 www.bojingnet.com 1

BOJINGnet L107 IOT Router Module

Datasheet

Name: 802.11b/g/n L107 IOT Router Module

Model No.: L107

Revision: v1.1

Manufacturers:Shenzhen BOJINGnet Technology Co., Ltd

Tel:15817228358

Emil:2529041661@qq.com or panben15817228358@163.com

Revision History

Revision Date Description Approved Remark

REV1.0 20170611 Initial Release PanyuLu

REV1.0 20180403 Correction error PanyuLu

REV1.1 20191105 Update the appearance PanyuLu

Summary of content (11 pages)

PAGE 1
BOJINGnet_L107_Datasheet_v1.1 BOJINGnet L107 IOT Router Module Datasheet Name: 802.11b/g/n L107 IOT Router Module Model No.: L107 Revision: v1.1 Manufacturers:Shenzhen BOJINGnet Technology Co., Ltd Tel:15817228358 Emil:2529041661@qq.com or panben15817228358@163.com Revision History Revision Date Description Approved REV1.0 20170611 Initial Release PanyuLu REV1.0 20180403 Correction error PanyuLu REV1.1 20191105 Update the appearance PanyuLu 深圳市博晶网络科技有限公司 www.bojingnet.
PAGE 2
BOJINGnet_L107_Datasheet_v1.1 Contents 1． 2． 3． 4． 5． 6． 7． 8． 9． 10. Overview…………………………………………………………………………………………………………………..………………………………….3 Features……………………………………………………………….…………………………………….…………………………..……………………3 Applications……………………………………………………………….…………………………………………………………………….……………3 Fuctional Block Diagram…………………………………….…………………………………………………………………….………….…………4 Module Specifications………………….…………………….…………………………………………………………………….………….…………4 Module Pinout and Pin Description…………………………………………………………………………………………………….…………….
PAGE 3
BOJINGnet_L107_Datasheet_v1.1 1. Overview BOJINGnet L107 IOT Rourer Module is based on MediaTek MT7688 chipset.the module requires only an external 3.3V power supply. MT7688 chipset integrates a 1T1R 802.11n Wi-Fi radio, a 580MHz MIPS® 24KEc™ CPU, 1-port fast Ethernet PHY, USB2.0 host, SD-XC, I2S/PCM and multiple low-speed IOs in a single SOC. The MT7688 supports two operation modes – IoT gateway and IoT device mode. The high-performance USB 2.0 allows MT7688 to add 3G/4GLTE modem support or a H.
PAGE 4
BOJINGnet_L107_Datasheet_v1.1 4. Fuctional Block Diagram L107 MODULE 5. Module Specifications Hardware Features Model Antenna Type Chipset solution Voltage Input Dimension(L×W×H) Wireless Features Wireless Standards Frequency Range Data Rates Receiver Sensitivity Modulation Technique Wireless Security 深圳市博晶网络科技有限公司 www.bojingnet.com L107 Ipex or LCC PIN MT7688AN 3v3 ±5% 40mm*25.0mm*3.0mm LCC 61PIN IEEE 802.11b/g/n 2.412GHz-2.484GHz IEEE 802.11b : 1,2,5.5,11Mbps IEEE 802.
PAGE 5
BOJINGnet_L107_Datasheet_v1.1 Others Environment Certification Operating Temperature: -20℃~55℃ Storage Temperature: -40℃~125℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing FCC CE RoHs The ongoing 6. Module Pinout and Pin Description 6.1 Module Layout: 深圳市博晶网络科技有限公司 www.bojingnet.
PAGE 6
BOJINGnet_L107_Datasheet_v1.1 6.2 Module Logic: 6.3 Pin Description: Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Function 1 MDI_RP_P0 MDI_RN_P0 MDI_TP_P0 MDI_TN_P0 MDI_TP_P1 MDI_TN_P1 MDI_RP_P1 MDI_RN_P1 MDI_RP_P2 MDI_RN_P2 MDI_TP_P2 MDI_TN_P2 MDI_TP_P3 MDI_TN_P3 MDI_RP_P3 MDI_RN_P3 MDI_RP_P4 MDI_RN_P4 Function 2 Function 3 SPIS_CS SPIS_CLK SPIS_MISO SPI_MOSI UART_TXD2 UART_RXD2 SD_WP SD_CD SD_D1 SD_D0 SD_CLK SD_CMD 深圳市博晶网络科技有限公司 www.bojingnet.
PAGE 7
BOJINGnet_L107_Datasheet_v1.
PAGE 8
BOJINGnet_L107_Datasheet_v1.1 8. PCB Footprint and Dimensions 9. Manufacturing Process Recommendations 深圳市博晶网络科技有限公司 www.bojingnet.
PAGE 9
BOJINGnet_L107_Datasheet_v1.1 Note ： The final soldering temperature chosen at the factory depends on additional external factors like choice of soldering paste，size，thickness and properties of the baseboard，etc. Exceeding the maximum soldering temperature in the recommended soldering profile may permanently damage the module. 10. Ordering Information Module No. SPI Flash Size L107_0864 8MByte 64MByte L107_16128 16MByte 128MByte L107_32256 32MByte 256MByte 深圳市博晶网络科技有限公司 www.bojingnet.
PAGE 10
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 11
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular transmitter 2.3 Specific operational use conditions This module is stand-alone modular.