Quick Installation Guide 1200Mbps Wireless Dual Band 11AC Gigabit Router Model:BL-W1200
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
1.Hardware Connection Wall Socket Wall Socket 4 Ethernet cable 3 To LAN port Cable/DSL Modem Internet 5 To WAN port 2 To LAN port Ethernet cable 1 Power off your modem. 2 Connect the WAN port on your router to the modem’s LAN port with an Ethernet cable. 3 Connect your computer to one of the LAN ports labeled 1~4 on the router with an Ethernet cable. 4 Power on the modem and wait for one minute.
3. After confirming the hardware connection and the status of LEDs, please click NEXT to continue. 4. After the connectivity is checked successfully, please click NEXT. Easy Set Assistant Easy Set Assistant Wireless N Router Wireless N Router 6. You can rename your wireless network on this page. The default wireless name is MYWIFI. Click NEXT to continue. 5. Select the connection type your ISP provides and click NEXT. Here we take Dynamic IP for example.
9. After the configuration is completed successfully, please click NEXT. 10. Click FINISH to complete the setup.
is the registered trademark of Shenzhen BILIAN Electronic CO.,Ltd.All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders 2012 All Rights Reserved. http://www.lb-link.cn Ver 1.