BL‐R7601MU2 Product Specification WLAN 11b/g/n USB MODULE Version: 2.
B‐LINK ELECTRONIC CO., LTD in shenzhen Contents Contents ............................................................................................................................................................1 1:General Description........................................................................................................................................2 2: The range of applying..................................................................................................................
B‐LINK ELECTRONIC CO., LTD in shenzhen 1. General Description BL‐R7601MU2 product Accord with FCC CE is a highly integrated Wi‐Fi single chip which supports 150 Mbps PHY rate. It fully complies with IEEE802.11n and IEEE802.11b/g stands, offering feature‐rich wireless connectivity at high standards, and delivering reliable, cost‐effective throughput from an extended distance. Optimized RF architecture and baseband algorithms provide superb performance and lower power consumption.
B‐LINK ELECTRONIC CO., LTD in shenzhen 4. Electrical Characteristics Recommended operating rage DC Characteristics 5. The main performance of product Item Description The supported protocol and IEEE 802.11n, IEEE 802.11g, IEEE802.11b standard Interface type USB2.
B‐LINK ELECTRONIC CO., LTD in shenzhen Type of Antenna LED indicator The transmit distance Working Power consumption MENS(L*W*H) The chipset model Integral Antenna status indicator Indoor 100M, Outdoor 300M, according the local environment 455MW 12.3MM*13MM*1.6MM MT7601 6. DC/RF characteristics Terms Contents Specification : IEEE802.11b Mode DSSS / CCK Frequency 2412 – 2462MHz Data rate 1, 2, 5.5, 11Mbps DC Characteristics min Typ. max.
B‐LINK ELECTRONIC CO., LTD in shenzhen 8. The supported platform Operating System CPU Framework Driver WIN2000/XP/VISTA/WIN7 X86 Platform Enable LINUX2.4/2.6 ARM, MIPSII Enable WINCE5.0/6.0 ARM ,MIPSII Enable 9.The definition of product Pin 1 2 3 6 4 5 the front side the back side Top and bottom view of BL‐R7601MU2 Ver1.
B‐LINK ELECTRONIC CO., LTD in shenzhen 1 P DC :3.3V 2 I/O UDM‐ 3 I/O UDP+ 4 P GND 5 P GND 6 O ANT 10.
B‐LINK ELECTRONIC CO., LTD in shenzhen Connect to the 6th pin of Module Connect to the 5th pin of Module a) The current of 3.3V power supply must be >300mA, its ripple wave must be <30mV. The GND pins of module and external antenna need to be an incorporated part. The ground plane should be larger, module and antenna should keep far away from interference source. b) The sixth pin is 2.
B‐LINK ELECTRONIC CO.
B‐LINK ELECTRONIC CO., LTD in shenzhen FCC Warning The devices must be installed and used in strict accordance with the instructions as described in the user documentation that comes with the product. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.