Installation Instructions
Table Of Contents
① ② ③
2. Replacing Battery( please follow steps as photo shows below):
① Pull the battery tray out of the battery compartment;
② Place the new CR2025 button cell battery in the tray slot correctly
based on the indicated cell polarity.
③ Push back the battery tray.
Notes:
1.Activate the remote control:
When first time to use the remote, pull out the insulation tab from the
battery compartment on the remote control. Battery has already been
installed and will work once tab removed. Save and insert back the tab if
no use the light for long time to avoid any battery power leakage;
①.Power button:
Power on/off the light temporarily.
Please unplug the light from the outlet if do NOT use for long time.
②.Color: Select star color of the light.
③.Autorun: The light runs with default programs.
④.Pause: Pause the motor.
⑤.Rotating Speed:
Change the rotational speed, 6 different levels available.
⑥.Step Speed:
Change the steep speed, 6 different levels availalbe.
⑦.Flash frequency:
3 different flash frequency available.
⑧.Timer:
Select the time the light works each day.The light will automatically
power off to your choice.And power on automatically next day at the
same time when you set the Timer.
⑨.Cancel:
Cancel the timer setting.The light will work till be powered off manually.
①
②
③
④
⑤ ⑤
⑥ ⑥
⑦ ⑦
⑧
⑨