Wiring Diagram

ManualsBrandsSHENZHEN BETOP ELECTRONICS ManualsElectronicsSensor

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Detection coverage

Typical installation height 15m

HD06VCRH

Technical data

Dimensions (Unit: mm)

1. Automatic On/off control with

Daylight sensor.

2. Optional detection range, holdtime ,

daylight threshold,

Stand-by period

and

Stand-by dimming level.

3. Remote control setting.

4. 5 year limited warranty.

15m

10-15M

Highbay

altitude

Daylight

threshold

Stand-by

period

Stand-by

dimming level

Hold

time

Detection

area

On/off

control

Remote control

setting

years

2 3 4 5 623456

Ceiling Mounted

Mounting

height

Wall Mounted

2 4 6 8 10 18161412

CoveredWell covered

Mounting

height

Detection area

DIM 0-10V

0s/10s/30s/1min/5min/10min/30min/+∞

10%/20%/30%/50%

Max,ø14m/45.92ft (ceiling mounted)

15m/49.2ft (ceiling mounted)

Operating voltage

Operating current

Output

≤0.5WStand-by power

Hold time

Daylight threshold

Stand-by period

Stand-by dimming level

5750-5824MHz

<0.3mW

Microwave frequency

Microwave power

Mounting height

Detection range

0.5~1.5m/s

Operating temperature

IP rating

12VDC

30mA±5%

IP65

Motion detection

-20°C~+60°C

Warranty 5 years

2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable

25%/50%/75%/100%

5s/30s/1min/3min/5min/10min/20min/30min

LED Driver

Red: 12V

Grey: GND

Purple: DIM

DIM GND 12V

ø50

22.5

Wiring diagram

Sensor

Summary of content (5 pages)

PAGE 1
Technical data Operating voltage 12VDC Sensor Operating current 30mA±5% Output DIM 0-10V HD06VCRH Stand-by power ≤0.5W 1. Automatic On/off control with Daylight sensor. 2. Optional detection range, holdtime , daylight threshold, Stand-by period and Stand-by dimming level. 3. Remote control setting. 4. 5 year limited warranty.
PAGE 2
Daylight Priority Piug & Play The cover with humanoid icon indicates there is built-in microwave module with sensor function; The cover without humanoid icon indicates there is no built-in module as well as sensor Icon No icon function. Dusk/Dawn sensor: Dual-PD technology brings a fully automatic dusk/dawn sensor which can tell the difference between natural light and LED light, to ensure the light will be off when needed.
PAGE 3
Installation Method 1. Automatically ON/OFF function: Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase. 1 1 Hold time 2 With sufficient daylight, even when motion detected, light remains OFF. After the last detection and the present hold time elapsed, light OFF. With insufficient daylight, when motion detected, light ON. 2 2. No daylight function The daylight threshold is set to "Disable".
PAGE 4
Attention 1. Please read the instructions carefully before using this product and keep it well for all users to read at any time. 2. The sensor should be installed by qualified electrician and ensure power is off before the installation. 3. We reserve the right to modify any incorrect text, image and necessary technical HD05R Remote Control Applications ON/OFF Turn on or turn off the remote control. WM/PIR parameters.
PAGE 5
HD05R Instruction Memory & Apply Mode FCC Statement 1. Press "ON/OFF button" to turn on the light or off. 2. To reset the parameters, Please follow the steps as below: Step 1 - Press ON, to turn on the light if it was off at the start. Step 2 - Press "Start" to the well-setting sensor. Step 3 - Press the button of Detection range, Hold time, Stand-by dimming level, Stand-by period and Daylight threshold one after the other in sequence (Press "+/-" to set parameters).