User's Manual

·
·
·
·
·
1.使用USB TO TYPE-C数
据线连接车载手机支架和
车载充电头，并把车载充
电头插入车载点烟器口；
或根据车内配置，也可将
数据线直接接入车内USB
口使用。
(注：本产品不单独配备车
载充电头，用户可根据需
要自行购买。若想实现
7.5W/10W快速无线充电，
请务必使用QC2.0/QC3.0
标准的车载充电头)
Wireless Car Charger
INFRARED SENSOR
FAST WIRELESS CHARGER
B18 User Manual
Package Contents
B18 Smart Car Phone Holder × 1
Air Vent Clip × 1
USB TO TYPE-C Cable × 1
User Manual × 1
Thank you for choosing B18 infrared sensor fast
wireless charger of smart car phone holder product, to
ensure the safe use and best performance, please read
this user manual carefully.
·
·
·
·
PRODUCT FEATURES
Smart wireless charging.
Automatic infrared sensor with telescopic arm.
Provides a full 360 degree rotation to achieve any
view angle.
Over Temp Protection, Over Current Protection,
Over/Under Volatage power, FOD.
Compatible with most smartphones models with
wireless charging. For other devices you can add
a wireless charging receiver. (Users can buy according
to your own needs).
·
·
·
·
·
Product Components (Car Phone Holder)
PRODUCT COMPONENTS (AIR VENT CLIP)
INSTRUCTIONS FOR INSTALLATION
1.Insert the ball adjuster
of the air vent clip into the
groove socket located on
the back of the car phone
holder and tight it.
2.Choose a suitable safe
angle position in the air
condition vent of the car,
fix the air vent clip, lock
the gear switch as required,
and complete the installation.
INSTRUCTIONS FOR USE
1.Use USB TO type-c cable
to connect the car phone
holder and car charging
head, and insert the car
charging head into the car
cigarette lighter socket;
or according to the car
configuration, you can also
just connect the USB cable
into the car USB port for use.
(Note: This product does
not contain car charging
head, user can buy it
according to your own needs.
If you want to achieve 7.5w/10w
fast wireless charging, be sure to
use QC2.0/QC3.0 standard car
charging head.
4. When the phone is in charging mode, the LED will be
always blue to indicate it’s working normally; When the
phone is fully charged, the LED will turn on green; When
the charger’s interface has metallic foreign body or
when the phone doesn’t aim at the center area of car
phone holder, the LED will flash blue light to indicate
abnormal charging and FOD protection mode. In this
case, please take off your phone and check whether the
charger has metallic foreign body or reposition your
phone to the wireless charging center area.
5. To release the phone just tap the left or right releasing
button, the holder will open its brackets automatically.
(When you tap the button, please ensure your hand is
close to the brackets and hold the phone safely)
LED INDICATION
Solid Green Light
Solid Blue Light
Blue Light Flashes
LED Flashes 4 Times
(Green, Blue, Blue, Green)
MEANING
Harger standby Mode/Fully charged
Device is charging
FOD Warning/Device not put in right area
Power On
MODEL:B18
TYPE-C Input: DC 5V-2A/DC 9V-1.67A
Output Power (wireless): 5W&7.5W&10W
Product Size: 121mm*73mm*55mm
Net Weight: 120g
Charging Frequency: 115-205KHZ
Max Charging Distance≤8mm
Power Conversion≥70%
PRODUCT SPECIFICATIONS
SAFETY PRECAUTIONS
1.Carefully inspect your charger before attempting to use
for the first time
2.Do not attempt to pierce, strike, or apply strong pressure
with sharp or heavy objects. Strong impact or shocks
could cause irreversible damage to the unit
3.Do not operate the charger if it has been exposed to
any liquid or if it is visibly wet or moist
4.When charging, the charging contact surface on the
phone’s back cannot carry metal materials
5. Always remember to unplug from your DC outlet when
not using the charger.
6. Keep the charger away from small children at all times,
or ensure strict supervision by an adult at all times
7. Do not expose the charger or any electrical parts to
extremely high or low temperatures or high pressure.
Do not expose the charger to fire, direct sunlight, or other
hot location. This may cause the unit to generate heat,
ignite, or explode. Using the charger this way may also
result in a loss of performance and in a shortened life
expectancy.
8.Do not attempt to disassemble or modify the smart
wireless charger car holder in any way.
9.Do not put any cards with magnetic strips or chips close
to this product to avoid demagnetization or damage the
data inside the chip;
10.Immediately discontinue use of the charger if it has any
visibly exposed parts or appears malfunction in any way。
Brackets
Non-slip
silicone Padding
Bottom clip
TYPE-C USB port
Infrared Sensor
Release Button
LED Indicator Light
Wireless Charging
Center Area
LED FUNCTIONS
360° rotation
Rubber Padding
2.The bottom clip of this holder
is not automatically opening,
but can adjust the height
within the range of its travel.
Users can adjust the height
according to different phones,
so that the phone is in the best
charging position (the wireless
charging area of the phone is
aimed at the wireless charging
center area of the holder).
3.When the phone is
close to the infrared
sensor of the car
phone holder, the
holder will open its
brackets automatically.
At this time, please
immediately aim your
phone at the wireless
charging area of the
holder, the holder will close
the brackets automatically and
clip tight of the phone,
and enter into automatic wireless charging mode.