Instruction Manual SG1 Smart Weight Scale
Overview EN Switch Units Make sure that the smart health scale is powered on and the LED screen displays normally. Remove the battery cover and press the “ RESET” button to switch units between KG, LB and ST. LED Display Insert the batteries and the 4 LED lights, digits, units and Bluetooth symbols will light up. Measuring Weight 1. Using the smart health scale without the app When standing on the smart health scale, the scale will start up and measure your weight automatically.
. Hold the baby to weigh Through the hold the baby to weigh function, the device will automatically calculate the baby’s weight. Open the weighing interface on the app and tap the icon to redirect to the “ Hold the baby to weigh ” interface, and you could get the baby’s weight according to the on-screen directions. Replace Batteries When the battery level is low, remove the battery cover and replace batteries. App Operation Instructions 1. Visit http://app.koogeek.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.