Southern Telecommute” LARGER MODEL: MC 924 2.4GHz Cordless Phone Apparel The first thing to do after unpacking your new cordless telephone is: Charge The Battery! Please read and follow the few instruction on page 1.
IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed assistance. A warning To prevent fire or shock hazard, do not expose this product to rain or any type of excess moisture.
MC 924 CARTON CONTENTS « MG 924 Base and Handset « Rechargeable Ni-MG Battery pack + Telephone Line Cord « Wall Mount Bracket » Belt Clip «AC Adapter (Class Il, COVE, 300mA, COMPOST) + User's Manual SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read and understand all instructions. 2.
5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 6. Slots and openings in the cabinet and the back or bottom are provided for ventilation, to protect it from overheating. These openings should never be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surfaces. This product should never be placed near or over a radiator or heat register.
E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinctive change in performance. 13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. SAVE THESE INSTRUCTIONS AA INSTALLATION PRECAUTIONS Never install telephone wiring during a lightning storm.
Exercise care in handling the battery in order not to short the battery with conducting material such as rings, bracelets and keys. The battery or conductor may overheat and cause burns. Recharge only the battery provided with or identified for use with this product. The battery may leak corrosive electrolyte or explode if it is not the correct type. Do not attempt fo rejuvenate the battery provided with or identified for use with this product by heating them.
3. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your number is called. In most, but not all areas, the sum of the REN of all devices should not exceed five To be certain of the number of devices that you may connect to your line, as determined by the REN, you should call your local telephone company to determine the maximum REN for your calling area. 4.
MAY-19-20@1 12159 FRONTIERSWOMAN 0755758624800 TO: BRBSRET411693 Pi3 . NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
MC924 CONTROLS DIAGRAM Strap Jack Za Headset Jack ee IN SEATTLE Led Indicator REDIAL Button Buzzer.
DESCRIPTIONS HANDSET CONTROLS: Channel {SCAN) Button -Used to manually select one of the 40 operating channels when you experience interference on the handset. Charge Contacts For charging the handset battery pack. We recommend that you clean these contacts periodically with an alcohol-moistened cloth or cotton swab. FLASH Button Momentarily hangs up the phone to access custom calling features such as Call waiting or Three-way calling provided by your local phone company.
RINGER ON/OFF Switch For normal use, set switch to ON. To save battery power and ta turn off the handset ringer, switch to OFF. TALK Button Press this button to place a call, answer a call, or end a call. Temporary TONE Button Press to temporarily change the dialing mode from Pulse to Tone when dialing in the Pulse mode. Provides tone function to access special services such as phone banking. VOLUME Control (LOUD) Button Allows you to adjust the handset volume to low, middies or high.
“INST + Ensure that the rechargeable Ni-MG battery pack is installed inside the handset battery compartment. + Set the RINGER ON/OFF switch on the handset to the ON position for normal use. « Iris strongly recommended that the Ni-MG battery be fully charged for at least 12 hours before initial use. + Raise the base unit antenna to the upright position to maximize cordless phone operating range and sound quality.
3. Insert the Ni-MG battery pack into the battery compartment of the handset. 4. Replace the battery compartment cover. NOTE: Use the type and size of Ni-MG battery pack, 3.6V, 400mA. It is recommenced that the Ni-MG battery pack should be fully charged overnight prior to initial use. BELT CLIP INSTALLATION With the back of handset facing up, insert one side of the belt clip hook into the matching slots at the top side of the handset as shown in figure 2.