IBM-3455 TABLE OF CONTENT important Safety Instructions CC Regulations cattery Cautionary Instructions SIM-3455 Parts Checklist ovation of Controls and Handset . BASE vn LCD Display :goosing a Location ale phone Setup Connecting the Base Wall Mounting Tone/Pulse Switch tatter installation Battery Duration . When the Battery Needs Charging When to Purchase a New Battery Pack headset and Data Jack. The Data Jack The Headset Jac) Belt-Clip basic Displays... Vlasic Redialing... Additional Options. settings...
@oo1 LINDA TECHNOLOGY » 09/28/14 MON 11:01 FAX 7567917944 TO. We. JESS TANG (ire-w) Fey LAD 0 Modifying or tampering with the telephone’ internal components can cause a malfunction and might invalidate the telephone's warranty and void your FCC authorization to operate it. if the trouble is harming the telephone lines, the telephone company might ask you to disconnect the telephone until you have resolved the problem, As it complies with Part 88 of tha FCC rules, your unit has been registered with the FCC.
BATTERY CAUTIONARY INSTRUCTIONS CATTERIES: CAUTION ‘s reduce the risk of fire or injury to persons, read and follow these instructions: For the cordless handset, use only 3.6V 500mAh Nickel Cadmium (Ni-Cd), cordless telephone battery pack (included). Do not dispose of the batteries in a fire. The cells may explode. Check with local codes for possible special disposal instructions. Do not open or mutilate the batteries.
Option Key err Mutterer Key Talk Key Temporary Tone/ View Left Key Flash/Edit Key Channel Key Handset Antenna Headset Jack TALK LCD Display Up/Down Keys Caller ID Key Dial Pad BEG 7 BEE FE ARES mE 3 £ New Call LED View Right Key Redial/Delete Key I Memory/Save —\ T / Key Microphone 7 Talk The EZ key is used to access the telephone line or end a call. Redial Key DELETE When the phone is idle or off-hook, press to redial the last number dialed.
OVATION OF CONTROLS AND FEATURES Base Antenna Handset Catch Page Button Charging Contacts ‘age ED Used lo initiate a handset page. {handset Catch Used io hold the handset on the base when it is wall mounted. hare LED On (red) when the handset is on the cradle being charged. On {green) when the handset is in use. Lights green when ringing. Charging Contacts Used to recharge battery and reset the security code in the handset. Right Side View Data Jack Used for connecting a computer or fax machine.
€D Character Fled display fe Number Field ne wr Date/Time New Leon RPT or Display or Cal Total Call Entry Counter Number lame Character Field splays caller's name and operational menus. lumber Field he number field will display numbers when dialing, viewing Caller ID, and when viewing the phone book. teatime Display hows the date and time of Caller ID calls or current date & time when die. {EW Icon Hen in idle mods, the NEW call icon will flash slowly when a new Caller 1D call as been received.
TELEPHONE SETUP re Connecting the Base Wall Mounting The IBM-3455 telephone may be installed on the studs of a standard wall phone plate or onto two screws (not included) fastened into the wall. When installing screws into plasterboard walls, use wall anchors (not.included) to ensure that the screws remain secure, Insert the screws into the wall leaving 3/16" of each screw extending out from the wall. Wall Mounting Instructions: 1. Remove the handset from the base. [ 2.
TELEPHONE SETUP ‘one/Pulse Switch Ll 1. Choose the correct dialing mods. Select the dialing mode Tone or Pulse by setting the switch at the back of the base [RB unit. Note: Changes to the switch position during a call do not take effect until the call has ended. Tone Pulse Switch Yip: If you are unsure of the proper dialing mode, make a trial call with the dial mode setting to TONE. If the call connects, leave the switch as is (TONE mode), otherwise, set to PULSE. 15 To install the 3.
HEADSET AND DATA JACK | The Data Jack Handset Idle Line Muted The jack located on the side of the telephone labeled "DATA" is a convenience jack. It is useful. for connecting a fax machine or modem when there is no telephone jack available for that ow device. Volume Control Call Timer The Headset Jack The headset jack is located on the side of the handset and is a standard 2.5mm plug. Simply slug the headset into the jack and the headset will be active.
slaking Calls 1. ‘Pick up the handset from the base. 2. Press 3). “TALK” will display on the screen and the call timer will begin, Wait until you hear a dial tone. TALE n= oy 3. Dial the number you wish to dial. & ag 4. When you are finished talking, press the G3 key or ol = place the unit back into the base to end the call. E163) a5 Note: The CHARGE light on the base wil illuminate £7) 60 3) when the line is active. Peed 8 Receiving Calls When you hear the phone ring: . 1.
Handset Settings Out can change the setting on the handset in the options menu. Access the options menu by pressing and holding the NURSERYMEN key until “RING:HI” is displayed. There are 13 settings in the options menu which can be changed. You can scroll through the option menu in the listed order by pressing the 3 key. Settings which have a listed number can be reached directly by pressing that number on the keypad.