How-To Guide

ManualsBrandsShenzhen Bao Tianhua Technology ManualsElectronicsLED PATTERN TWS BLU PPK

-1(One)

Instruction

Beam Light Up TWS Earbuds

/12 hours

1 hours/2 hours

200

TWS earbuds

earbuds

TWS earbuds

earbuds

TWS earbuds

earbuds

How to charge

Earphone battery capacity: 30mAh

Charging case battery capacity: 250mAh

2A2H6MU01039

CLASS 1 LED PRODUCT

1.Dust Net

2.Touch Button

3.LED Indicator

4.Charging Port

1.The earbud(s) will automatically power on and pair to each other when you open the

charging case.

2.The earbuds will power off if they don’t connect to any device within 5 minutes. If

the earbuds turn off. To turn the earbud(s) on again put the earbuds back

into the charging case and then open the charging case.

3.To pair your earbuds, turn on the Bluetooth on your device and choose “BEAM BT

TWS” on the list to connect. When the LED light turns off, they are paired

successfully and you will hear a beep tone.

4.To answer a call, short press the earbud Multi-function button for once.

To reject a call, long press the the earbud Multi-function button for two seconds.

5.Short press the earbud Multi-function button to stop the music; press it again to

resume playing.

6.Long press the earbud Multi-function button 5s until the red light flashes, then the

Bluetooth device is turned off. The earbuds turn off automatically when the earbuds

are away from the Bluetooth device for a duration of over 5 minutes.To turn on the

earbuds, press the earbud Multi-funtion button 5S until the blue light flashes.

1.Charging your case:

Plug in the charging case using the USB Type-C cable included.

While the case battery is charging, the case LED indicator will be flashing red.

When the case is fully charged, the light will change to solid red.

When the battery is low, there will be a beep tone.

2.Charging your earbuds:

Place the earbuds inside of the charging case.The earbuds will automatically start

charging once placed in the charging case.

A solid red light on the earbuds will indicate that the earbuds are charging.

Once fully charged, a blue light will turn on for 1 minute and then turn off.

3.The earbuds and case can be charged simultaneously, but the earbuds will not

charge if there is no power in the case. The case needs to have at least a minimum

charge to charge the earbuds. You must charge the TWS if it has not been used for

more than 3 months.

USB Type-C

Charging Port

LED Indicator

Touch Button

Dust Net

LED Indicator