080P Full HD Dual Lens Dash Camera Instruction Manual B-T47 1
Contents Important Notice………………………………………...3 Product Diagram…………………………….…………………3 Set up and Installation…..……………………..…………..5 Function Description…………………………………….…..6 Setting………………………………………………….…………..7 Specification……………………………………..
Important Notice 1. This product is intended for use in motor vehicle only. DO NOT install the camera where it might block the driver’s view of road (including the mirrors) or the deployment of the airbag. 2. As default, The A lens is facing backward, used to record inside of car; The B lens is facing forward, used to record outside of the car, cover the road. 3.
1. 2. 3. 4. 5. LED Indicator Display Screen IR Night light A Rear lens 6. Mode/Menu/Lock Button 7. Up/Record Button 8. 9. 10. 11. 12. 13. B Front lens Port of holder Mini USB Port Reset Button (Inside the hole) TF Micro SD Card Slot Down/Screen switch button Power/ OK Button Button Function Explanation Name Picture Function Explanation 1.Power on (press this button for a short time), Power off(press this button for long time) Power/ OK 2. Ok Button, confirm what you want to choose Button 3.
recording video automatic, need to press this button again to start recording. 1. Press this button for a short time to enter into menu mode or exit menu mode Mode/ Menu Button 2. When it records the video, press this button short time, it will turn on/off audio. 3.
2. Plug the included power adapter into the car cigarette lighter socket, the indicator will light up meaning power is on. 3. Connect the power adapter and the dash cam, and route the excess cable alongside the interior trim for better looking. 4. Start your car, the camera will automatically power on, check the lens angle and coverage, make sure all functions works well before going on the road. Function Description Power on/off: 1.
of the screen, it means the device is in the photo mode. 2. Press and release power button to take a photo. Playback Mode: 1. When the device is in the standby state (when recording is stopped), press the menu button about 2 seconds until the photo icon appears on the top of the screen, it means the device is in the playback mode. 2. Press the up/down button ▼/▲ to select your desired file. If you want to play a video file, please press the power button to play video.
Options: off/1min/3mins/ 5mins/10mins Save the video for the setting time. When the card is full, the oldest video will be automatically overwritten. HDR Options: On/Off If HDR is on, the highlights and shadows on the video can be displayed with richer details. The larger the dynamic range, the richer the levels. Exposure To set or reset the exposure level as desire. This will cause the video become dark or bright.
in-car, the recording video will be black and white. Screen Saver Options: Off/15 Sec/30 Sec/1 min If you set the screen saver time, the screen will enter blank screen according to the setting time to protect screen. Delay Power Off Options: Off/5 Sec/10 Sec /15Sec If you set the delayed power off time, when the device is powering off, the setting time will be extended and then power off to confirm the integrality of the last video.
Photo Settings: In the photo mode, short press the menu button to enter photo menu mode. Use the up/down button ▼/▲to select the function you would like to adjust. Press the power button to enter the subsequent menus. Press the Button to enter the System settings menu. Press the Button again to exit the menu mode. Press the power button to enter or confirm the settings.
shaking. Date Stamp Options: Off/Date/Date&Time To set or reset off/date/date time. If it is on, the date and time will imprint on the picture. Exit Press the power button to Select OK to exit the setting menu mode. Playback Settings: In the playback mode, short press the menu button to enter playback menu mode. Use the ▼/▲ buttons to select the function you would like to adjust. Press the power button to enter the subsequent menus.
Install and use WIFI: 1. Download APP “WitCam” from App store and Google Play 2. Press to enter system to set up, choose WIFI and open WIFI, it will show SSID name and password in the led display, SSID name is NVT_CARDVcc8cdaa50ee 3. Open phone set up, and find SSID name (default password is 12345678),input password, and connect WIFI. 4.
Specification: Video Resolution 3MHD P30 FHD P60 FHD P30 3MHD P30 + HD P30 FHD P30+FHD P30 FHD P30+HD P30 HD P30 +FHD P30 Photo Resolution 12M, 4032 x 3024 pixels 10M, 3648 x 2736 pixels 8M, 3264 x 2448 pixels 5M, 2592 x 1944 pixels 3M, 2048 x 1536 pixels 2MHD, 1920 x 1080 pixels 1.3M, 1280 x 960 pixels VGA, 640 x 480 pixels Display Screen CPU Sensor 2.
Storage time for 16GB card About 92 minutes Battery Life About 10 minutes SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.