User's Manual

2.4Ghz Wireless Mini Multimedia Keyboard User Manual

Features:

10m 2.4G wireless using distance

Keyboard and mouse 2-in-1

Comfortable scissor key structure

Smooth optical-sensor trackball controller

Quiet scroll wheel

Smart power saving mode

Support multi language

Specifications:

Working voltage:+3V

Static current:50uA

Key dynamic current:1.5mA

Trackball dynamic current:15mA

Keyboard size:261*112*30mm

Weight:210g

Keys:59 keys+15 Multi media keys+20 hot keys

Key elasticity:50±8g

Key pre travel:0.5±0.2mm

Key total travel:1.7±0.5mm

Operation distance:10m

Using battery:2pcs of AA battery

Key using lifetime: over 6 million times

Material:ABS

How to use

1.When you get this 2.4g wireless air keyboard, please open the battery case on the keyboard backside.

2.Please insert 2 pieces AA alkaline batteries.

3.Please find the mini USB receiver on the right of keyboard back

4.Please put the mini USB receiver into the USB port.

5.Please switch the power on.

6.After the keyboard is connected, u can use it freely.

Note:

This keyboard works for Android, Windows, Mac system.

This keyboard will be in sleeping mode without using in a few minutes.Please press any key on the keyboard to wake it up.

Please take off the batteries if no use in a long time.

PAGE 1
2.4Ghz Wireless Mini Multimedia Keyboard User Manual Features: 10m 2.4G wireless using distance Keyboard and mouse 2-in-1 Comfortable scissor key structure Smooth optical-sensor trackball controller Quiet scroll wheel Smart power saving mode Support multi language Specifications: Working voltage:+3V Static current:50uA Key dynamic current:1.5mA Trackball dynamic current:15mA Keyboard size:261*112*30mm Weight:210g Keys:59 keys+15 Multi media keys+20 hot keys Key elasticity:50±8g Key pre travel:0.5±0.
PAGE 2
Multimedia function description Attention: When the low battery indicator is flashing, you need to refresh batteries.
PAGE 3
§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.