Optical wireless gaming headset instruction manual (Work with X BOX 360 / PS3 / PS4 / PC / MAC) (COMPATIBLE WITH XBOX ONE IF YOU HAVE MICROSOFT ADAPTOR OR NEW CONTROLLER)
Contents English 02-20 Français 21-40 Español 41-60 Deutsch 61-80 Italiano 81-100 日本語 101-120
Headset Optical wireless gaming headset instruction manual Item name : 2.4G optical wireless gaming headset 1 . 3.5mm Microphone port 2. 3.5mm XBOX port 3. Working indicating light ( Flashing during pairing , solid blue light paired in use ) 4. Power button ( long press 3 seconds to power on ) 5. Mic mute + pairing button 6. Game sound volume switch 7. Chatting sound volume switch 8. USB charging port 9.
, PS4 setting 2), Choose Sound and Screen and press Enter EN 1, Connect PS4 optical port with Transmitter optical port ( protection cover must be removed ) ; Using port with Transmitter using Optical cable 3), Choose Audio Output Settings and press Enter Micro USB short cable to connect PS4 USB USB port as below : 4), Choose Primary Output Port and press Enter 5), Choose DIGITAL OUT (OPTICAL) and press Enter 2, Detail connection diagram : 6), Remove √ tick mark in front of “Dolby Digital 5.
9), Then choose setting and choose Devices and press Enter 5, Common issue and solution 10), Choose Audio Devices and press Enter Solution 1、Long press power on button for 3 seconds 1) Can’t power on 2、Using USB cable to charge the headset , headset 2) Charging light off charging red indicating light on during charging and off after fully charge at about 5 hours charging Power off after 10 mins Fully charge headset for 5 hours before use 11), Choose Output to Headphones and press Enter No background
4), Back to setting screen , select Sound Settings EN 5), Select Audio Output Settings 6), Select Optical Digital 2, Detail connection diagram : OPTICAL 7), Remove √ticks of “Dolby Digital 5.1ch” and “DTS 5.1ch” and press Enter to confirm 8, Set Audio Multi-Outpot on 3, PS3 console setting 1), After power on PS3 console , select setting and choose Accessory Settings 4, Operation method : 1), Connect transmitter and PS3 console USB port using the short USB cable ,light flashing .
5, Common issue and solution Common issue Solution EN 1、Long press power on button for 3 seconds 1) Can’t power on 2、Using USB cable to charge the headset , headset 2) Charging light off charging red indicating light on during charging and off after fully charge at about 5 hours charging Power off after 10 mins Fully charge headset for 5 hours before use 1.Optical cable not connected correctly , please remove protection cover and connect with right direction 2.
4, XBOX 360 System Setting 7), Select Enable Sound Effects 1), After power on Xbox 360 , select setting then select System EN 8), Back to settings in main screen and choose Preferences 2), Select Console Settings 9), Select Voice 3), Select Audio 4), Select Digital Output 10), Adjust Volume level of Voice Volume & Game Volume and choose Play Through Both 5), Select Digital Stereo and select Digital Stereo ( do not choose Dolby Digital 5.
6, Common issue and solution Solution EN Common issue 1、Long press power on button for 3 seconds 1) Can’t power on 2、Using USB cable to charge the headset , headset 2) Charging light off charging red indicating light on during charging and off after fully charge at about 5 hours charging Power off after 10 mins Fully charge headset for 5 hours before use 1.Optical cable not connected correctly , please remove protection cover and connect with right direction 2.
2), Select Display & sound 8), Choose Do nothing EN 4, Operation method : 3), Select Audio output 4), Select Optical audio 1) Connect transmitter and Xbox One console USB port using the short USB cable ,light flashing . 2) Long press power button for 3 seconds to power on the headset , the headset should auto pair with the transmitter and solid blue light light up , if the headset light keep flashing , please pair them once again .
8, Suitable for PC/MAC 4, Click mouse left button to choose the “Recording” as Picture 6 , and then choose the “2.4G wireless headset” as shown in Picture 7 , and choose the “Set Default ” as shown in Picture 8 , Now that the PC setting is finished.
Step 5 Choose Sound Effects as Play sound effects though -- 2.4 G Wireless Headset , tick the three ticks shown in below diagram 10, Specification Headset : Transmitter : Continuous working hours : ≥6h Charging hours: ≈5h Frequency range: 2.403-2.478 Ghz Latency: 24MS Transmission power: +2 dBm Receiving sensitivity: -85dBm Speaker diameter: Ф40mm Speaker impedance: 32Ω Speaker frequency response: 20~20KHz Microphone specification: 6*2.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.