User manual guide for 2.
Features Interfaces: 1.The HW-390M is a 2.4Ghz wireless headset, specially designed Transmitter: for use with X BOX 360 and PS3. The transmitter has a built-in Microsoft approved non-driver USB sound card and adopts a pure-digit decoding system. You can hear both game sounds 1. 3.5mm audio input 2. Mini USB port 3. Working indicator light and the chat through headset courtesy of the special circuit design and in built amplifier. Hear chat in real-time overlayed with stereo game sounds.
2. Connect with PS3: Use RCA cable to connect with TV and transmitter: plug 3.5mm jack into 3.5mm hole of the transmitter, the white/red RCA plugs are connected with the corresponding interface of TV; Use the USB cable to connect with the transmitter and USB port of PS3 as pictured below: 3. Connect with X BOX 360: Use RCA cable to connect with TV and transmitter: plug 3.5mm jack into 3.
3. Low battery warning: when the voltage of the built-in battery is low, the LED light on the left side of headset will flash for 1 second, to remind you that the battery strength is low. 4. When you use the headset for PC/MAC, the game volume+, volume- cannot be used. Control volumes using the PC or Mac operating system. 5. When you use headset for WII/TV as an amplified headset,the chat Volume buttons will be disabled. 6.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.