User's Manual

Sports Bluetooth Headset User Manual
Thank you for choosing and buying our Sports
Bluetooth Headset! Please browse all details of this
manual before using it to get best playing effect.
Product Introduction
Sports Bluetooth Headset , is able to play music stored in
mobile phone or other Bluetooth devices through
Bluetooth connection between Sports Bluetooth Headset
and Bluetooth devices. It also works as Hands Free when
you have a call comes in, if your mobile phone supports
Bluetooth. And after end the call it can convert back to
play music automatically.
Sketch Picture
1. USB Charging Port
2. Next Track/Volume Up
3. Multi-Function Button(MFB)
4. Previous Track/Volume Down
5. Headset(R/L)
6. Microphone
Function Description
1. Bluetooth V3.0 + EDR
2. Stereo Bluetooth Headset
3. Talking in Hands Free ;
4. Support
A2DP, AVRCP and HSP
5. Lithium rechargeable battery;
Operation Guide
Preparation
Please charge your device before your 1
st
time use it. Use
the USB charging cable provided to connect any
computer/notebook or USB power adapter. When charging,
red light indicator will appear , When fully charged. Red
indicator light will turn off , Charging time : Estimated 2~3
hours.
Pairing
Before using Sports Bluetooth Headset ,please pair it with
your smartphone , MP3 Player. computer or any Bluetooth
devices.
Step -1 Press the MFB button 4s to turn on the Sport
Bluetooth Headset, you can see the red and blue LED flash
alternative,
Step-2. Follow the operating instruction of your Bluetooth
mobile phone or any other Bluetooth device to start the
pairing process. Typically, this is done by going to
a ”Connect” or “Setup” menu and then selecting the option to
search the BT music Headset that is still in the pairing mode
Step-3. When your device detect the “BTH450”, initiate and
pair it.
Step-4. Should device request for password, enter default
password “0000”, If the connection is successful, the blue
LED of the headset will stop continuously flashing and
become slow flash twice every 4 seconds.
If the pairing is unsuccessful, please turn off the Headset and
turn it on again. Then, return to Step-1 and do the pairing
procedure again.
Play/Pause music
In idle state, press MFB button one time to play or pause
music.
Previous/Next song
When playing music, you can press “Volume Down” button to
play previous song and “Volume Up” button to play next
song.
Make a Call
Step-1 Use the mobile phone’s keypad to dial the phone
number.
Step- 2 Press mobile phone’s “Send” or “OK” key. The mobile
phone initiates the call and transfer the call from the mobile
phone to the headset
Answer a Call
Step-1 If there is an incoming call while you are listening to
the streaming music, the music will temporary stop and short
beep instead.
Step-2 Just press MFB button one time to pick up the call.
End a Call
Use either of the following methods to end a call.
Method-1 Press MFB button one time to end a call from the
Headset.
Method-2 End a call from the mobile phone’s keypad.
If you are listening to music when there is incoming call or
you are making a call, the Headset will switch the connection
from the music player (A2DP) to the mobile phone (HSP or
HFP); the streaming music will be paused temporarily. After
you end the call, the music will be played and streamed to the
Headset again.
Notes：When you press MFB button to answer or end a call,
please just press one time. Do not press and hold.
⑥
①
⑤
④
③
②