Tablet Bluetooth Keyboard and Case for iPad Model Number: BW05003-3 INSTRUCTION MANUAL After Sales Support Telephone: Email: 1 866 235 5029 mp656@messageplex.
Contents Welcome General Safety Instructions Parts List Features Getting Started Instructions Other Useful Information Repair and Refurbished Goods or Parts Notice 2 3 4 5 6 7 8 10 12 After Sales Support Telephone: Email: 1 866 235 5029 mp656@messageplex.
Welcome Congratulations on choosing to buy a BAUHN® product. All products brought to you by BAUHN® are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 2 Year Warranty. We hope you will enjoy using your purchase for many years to come. After Sales Support Telephone: Email: 1 866 235 5029 mp656@messageplex.
General Safety Instructions Read this manual thoroughly before first use, even if you are familiar with this type of product. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and carton. If applicable, pass these instructions on to the next owner of the appliance. • In order to prevent environmental factors (dampness, dust, food, liquid etc.
Parts List 1 2 3 4 5 6 7 8 Holding frame for tablet USB Charging cable Keyboard Bluetooth indicator light Bluetooth connect button Power indicator light Power on/off switch Charging interface 1 2 3 4 After Sales Support Telephone: Email: 1 866 235 5029 mp656@messageplex.
Features Compatibility The Bluetooth Keyboard can be connected to iPad 2, 3, 4 iPhone 3G, 3GS, 4, 4S, 5 and iPod Touch, iOS4.0 or later, Mobile Internet Devices (MID), Smartphones, PCs and other bluetooth enabled devices. For other bluetooth enabled devices, please verify the bluetooth standard and compatibility before attempting to connect to the keyboard. NOTE: Depending on the operating system and version of the connected device, some function keys may not work. Features * * * * * 6 Bluetooth 3.
Getting Started Before first use • Unpack the product but keep all packaging materials until you have made sure your new Tablet Bluetooth Keyboard and case is undamaged and in good working order. Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all packaging materials are out of their reach. • Inspect the USB cable for damage. Do not use the product if the product or the USB cable have been damaged or are not working properly.
Instructions Pairing the Bluetooth Keyboard with an iPad The following instructions are for pairing the product with an iPad. Step 1: Slide the Power On/Off switch to the ‘On’ position. The blue ‘Bluetooth’ and the red ‘Power’ indictors will illuminate for 4–5 seconds and then go off. Step 2: P ress the ‘Connect’ button, the red ‘Power’ light will be on and the blue ‘Bluetooth’ light will start blinking. The Bluetooth Keyboard is now ready for connection to your iPad.
Instructions (Cont.) Step 4: Enter the password code displayed on the screen, then press the Enter key. The Bluetooth Keyboard will show up as Bluetooth Keyboard “Not Paired”. Select. You will now be prompted to enter a PIN using your keyboard. Step 5: Upon successful connection, the Bluetooth Keyboard will be listed as “Connected”. NOTE: D o not fold the cover of the Bluetooth Keyboard while it is still in use. After Sales Support Telephone: Email: 1 866 235 5029 mp656@messageplex.
Other Useful Information Troubleshooting guide Unable to connect 1. Make sure the Bluetooth Keyboard is within its effective working range (32ft). 2. Make sure the Bluetooth Keyboard is still paired. If not, pair the units again. 3. If the Bluetooth Keyboard is connected to any other Bluetooth products, please cancel, turn off the keyboard and pair again. 4. Check the battery power and recharge the unit, if necessary.
Other Useful Information (Cont.) Specifications Executive standard Bluetooth V3.0 Working distance 32 feet Modulation system FHSS 2.4G Transmitting power Class 2 Operating voltage 3.0-5.0V Working current <4.0mA Standby current ≤1mA Sleeping current <200μA Charging current 100mA Standby time 60 days Uninterrupted working time 30 hours Charging time 4~4.
Tablet Bluetooth Keyboard and Case for iPad Warranty Card Unfortunately, from time to time, faulty products are manufactured which need to be returned to the supplier for repair.