:LUHOHVV 3 $+' E EDFN XS FD DPHUD 6KHQ]KHQ $XWR YR[ 7HFKQROORJ\ &R /WG 0RGHO 12 )263 559& : DJHV 3D 7 3URGXFW VWDQGDUG FDUG 6HW GDWH 2019-110-10 9HU UVLR Q 1.
FOSP-RVC C-W8Extennsion cable 4.2m 4 h1 6WDQGDUGV IXQFWLRQφ 1.W When the recceiver is poowered on for fo the first time, the co ode is not paired, p and the paired camera c is not n worrking, the power-on inddicator flashhes once annd enters th he no-signall state direcctly. The ĀNo Ā Signalā prom mpt is outpuut, only whhen the codee operation or the cameera signal iss connected. Will switcch to the codde screeen or real-ttime video screen. s No signal s prom mpts are sho own in Figurre 1.
Picture 2Pair code interface 3.If the communication connection is successfully established in the above steps, the real-time video screen display screen will be automatically entered, and the yellow signal strength icon will be displayed in the upper left corner. The total connection signal status is represented by 0 to 4 total 5 grids. The actual picture of F is shown in Picture 3, and the imaging effect is shown in Picture 4.
Picture 4Mirror view 4.In the case of high illumination brightness, the camera outputs a color video signal by default. As shown in Picture 5. Picture 5Color mode 5.In the nighttime environment where the illumination is very low, the camera automatically turns on the infrared light to fill the light, and the camera switches to the night mode to output a black and white video signal. As shown in Picture 6.
Picture 6Night mode 6.View firmware version: Press the receiving box button 3 times in succession, the receiving box and camera current firmware version 5S will be superimposed in the video; in the unconnected state, only the receiving box firmware version will be displayed, as shown in Picture 7; in the communication connection state At the same time, the corresponding firmware version of the receiving box and camera is displayed, as shown in Picture 8.
Picture 8Receiver and rear view camera firmware version Remarks: [1] Measure data in an open, unobstructed, electromagnetically free environment. [2] Camera to receiver box image transmission delay time. The above data is for reference only; the data may be subject to environmental impact errors, please refer to the actual. ,QGLFDWRU VWDWXV DQG PHDQLQJ zzzzzz Steady on, the receiving box works normally, and the signal transmission is normal.
Date 2019.08.30 2019.10.10 Version V1.0 V1.1 Issue Description First issue Upgrade transmission power specification FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
