User's Manual

1 2
43
WiFi PIR ON/OFF Switch
Model：u370
Http://www.a-brt.comE-mail:[e-mail]
Asia Bright
Shenzhen Asia Bright Industry Co.,Ltd.
Address : Building 10, Asia Industial Park, Gangtou, Bantian, Shenzhen , China
地 址 深 圳 市 坂 田 岗 头 村 亚 洲 工 业 园 10 栋 邮编:518129
Tel : [phone] 89748211 Fax : [phone] 89748226
深 圳 市 亚 晔 实 业 有 限 公 司
User Manual
2.Technical Parameters:
（1）. Operation Voltage: AC 108~240V
（2）. Frequency: 45Hz~65Hz
（3）. Power Rating: 5W~600W (600W max for
incandescent light, and 150W max for LED light)
（4）. PIR Sensing Range: up to 8 meters
（5）. PIR Sensing Angle: up to 120 degrees
(when installed at 1.2m height above ground )
（6）. Wireless Distance: 30 meters max
communicating distance from gateway switch
（7）. Load Types: Incandescent lights;
Halogen lamp; LED;and CFL lights.
3.Operation Guide:
User can also turn on/off the load using the
On/Off button.
The preset delay-off function is still in effect if
the load is turned on by manual operati
1.Features:
Equipped with PIR Motion Sensor, u370
brings to users convenience and help users to
conserve energy by automatically turning off
lights when a room is not oc
ON/OFF
Wi-Fi indicator light
PIR Sensor
Reset
Safety Power Switch
（2）.Scan the QR code in the user manual
to download our Application, and add
switches on the Application according to the
operation guide.
（1）.The blue indicator will flicker 3 times
after being powered on and the initialization
process takes 30 seconds.
After initialization process finished, the PIR
sensor starts working.
The switch will turn on the load automatically
when it detects human motion and the ambient
light is dark, and turn off the load after a preset
delay-off time when it detects no human
motion.
（4）. After Internet configuration finished, the
PIR sensitivity, ambient light sensitivity, delay
off timer and operation mode can be set on the
Smartphone. The description of operation mode
as below.
（3）. Set the Wi-Fi indicator to quick flashing or
slow flashing:
Wi-Fi indicatorto quick flash and slow flash.
Press and hold the ON/OFF button to switch the
Operation Mode
Manual Control
Mode
Auto Control
Mode(Default)
Semi-auto
Control Mode
Description
Manual ON, manual OFF, the PIR sensor does
not control the load.
Auto ON when the PIR sensor detects human
motion, auto OFF when no human motion
detected. Manual control is also available. After
the load is turned off manually, the PIR function
will stop working for 20 seconds.
The PIR sensor starts working after the load is
turned on manually, and turn off the load
automatically when no human motion detected.