IPCAM User manual IP Wireless / Wired Camera REMOTE PAN/TILT ROTATE User Manual IPCAM 1: IPCAM 2: IPCAM 3:
IPCAM User manual Contents 1 WELCOME..................................................................................................................-11.1 Features................................................................................................................-11.2 Packing list...........................................................................................................-21.3 Product view...........................................................................................
IPCAM User manual 1 WELCOME This model IP Camera is an integrated wireless IP Camera solution. It combines a high quality digital Video Camera with network connectivity and a powerful web server to bring clear to your Desktop from anywhere on your local network or over the Internet. The basic function of it is transmitting remote video on IP network. The high Quality video image can be transmitted with 30fps speed on the LAN/WAN by using MJPEG hardware compression technology.
IPCAM User manual Advanced Features Multi-Protocol support and Transportation IP CAMERA supports Multi-Protocol such as TCP/IP, SMTP and HTTP. Sending the image to your mailbox automatically when the IP CAMERA is triggered. Video Image PTZ function Users can control the camera direction on the video image. Motion Detection Your may use the internal Motion Detection function or external sensor to trigger images Recording and transportation. Alarm sensor input/output.
IPCAM User manual 1 2 3 4 5 Sensitive Hole Infrared LED LENS CMOS sensor with fixed focus lens. Network Indicator LED if there is network activity, the LED will blink.
IPCAM User manual Figure 1.2-3 RESET BUTTON: press and hold down the RESET BUTTON (Figure 1.3 under pan) for 15 Seconds .Release the power button and IP Camera will be reset back to the factory default Parameter. 1.4 PC System Requirements System configuration requirements :( Example for view four IP Camera) CPU: 2.
IPCAM User manual 1.5 Hardware Instruction Follow the steps below to set up your camera hardware. Make sure to follow each step carefully to ensure that the camera operates properly 1) Plug the network cable into the camera and then into your Cable/DSL router. Plug the power adapter into the camera and then into the power outlet. 1.6 Software installation Software installation is the key to the successful use of this product. 1 Open the CD, find the software as instruction; 2 Double click setup.
IPCAM User manual The computer restarts upon installation completion and an icon appears on the Desktop automatically. NOTE: Before installing and using the product, please read the following precautions carefully and make sure they are fully understood. Use only the power adapter attached with the product .Use of unauthorized power adapter may cause damage to your IP Camera. Do not touches the lenses of the IP Camera at will .
IPCAM User manual IP Camera terminal shall be installed in an indoor environment. For firmware upgrading or connection with an external, refer to detailed instructions contained in the CD. 2 SOFTWARE OPERATION 2.1 IP Camera Tool When the Device has been mounted properly, you can double click the Icon “IP Camera Tool” and a dialog box as Figure 2.1 will pop up. Note: The software searches IP Servers automatically over LAN. There are 3 cases: 1. No IP Cameras found within LAN.
IPCAM User manual Five Options Choose the IP Camera list and Click right mouse, there are five options ,Basic Properties, Network Configuration, Upgrade Firmware ,Refresh Camera List ,Flush Arp Buffer. Basic Properties There are some device information in the Basic Properties, such as Device ID,System Firmware Version, Web UI Version. Network Configuration In this page, you can configure the Network parameter.
IPCAM User manual IP address: Fill in the IP address assigned and make sure it is in the same subnet as the gateway (i.e. the first three sections are the same) Mask: The default subnet mask of the equipment is: 255.255.255.0 Gateway: Make sure it is in the same subnet with PC IP address .Default Gateway address is 192.168.0.1 DNS: IP address of IPS network provider. Port: LAN port assigned for the equipment, usually 80 User & Password: Default administrator username/password: admin.
IPCAM User manual Refresh Camera List Refresh camera list manually. Flush Arp Buffer When cable network and wireless network of the device are fixed IP address .There is a problem you may encounter is can search the camera IP but can’t open the camera web page .you may try to use Flush Arp Buffer. 2.2 Camera Login You can access the camera through IP Camera Tool or IE directly. 1) Double click the IP address of the IP Camera listed (Figure 2.1).
IPCAM User manual Enter the user name and passport, click OK, and will show the below GUI: Figure 2.6 (1) Active Mode(For IE Browser): avaliable in IE6.0 or above explorer (2) “Server Push Mode”: avaliable in Firefox, Google explorer (3) “Sign in mobile phone”: avaliable in Mobile phone 2.3 ActiveX Mode (For WEB Browser) 2.3.1 For Visitor The status of 9 routes, as shown below.
IPCAM User manual Figure 2.7 For example: if is bright, the first route is on Detection (Motion Detection). If you want to detect 4 views, need to click this icon If you want to detect 9 views, need to click this icon OSD: Display date and time on the video .You can disable the OSD function or choice Other color, (OSD: on-screen display) Reversal: To see the reversal image Mirror: To see the mirror image.
IPCAM User manual TALK: Click icon RECORD: Click icon Camera Speaker open, Remote Voice Output into REC mode, is stop. 2.3.2 For Operator When login as operator administrator, you can enter the IP Camera For Operator Figure 2.8 Vertical patrol Horizontal patrol Stop patrol IO output Switch on/off. (See 2.5.
IPCAM User manual 2.3.3 For Administrator When you login as administrator, “For Administrator” is enabled. 2.3.3.1 Multi-Device Settings Use multiple cameras in LAN In the Multi-Device Settings page, you can see all devices searched in LAN. The 1st Device is this device default. You can add more cameras list in LAN for monitoring .This Web software Supports up to 9 IP Cameras online simultaneously. Figure 2.
IPCAM User manual Figure 2.10 Use multiple cameras with a single IP address In the Multi-Device Settings page .You can use multiple camera with a single IP address by configuring different ports for each camera .By default, the Device uses port 80 for accessing the camera’s homepage and video streaming. Adding a second camera: If you decide to add a second IP camera, you will need to change the port number for the second camera. Camera#2: LAN IP address is 192.168.1.
IPCAM User manual Adding more cameras: If you decide to add more cameras, you will need to change the port number for the other cameras, such as 82,83,85. To access these cameras from the Internet, you would use: http://192.168.1.124:82 Upgrade Device Firmware Upgrade Device Firmware and device embedded web UI software in this page. Figure 2.11 Restore Factory Settings Restore factory settings of the device. Reboot Device Reboot the device. 2.3.3.
IPCAM User manual Http Port: In most cases, you can leave this value as however, if your Internet Service Provider blocks this port, you may switch to another port number such as 85. Figure 2.12 Wireless Lan Settings Please enter the wireless net setting page of the wireless Router to out SSID, Channel, Encryption, Authentication. Figure 2.
IPCAM User manual ADSL Settings When connected to the Internet through ADSL directly, you can enter the ADSL username And password obtained from ISP. Figure 2.14 UPNP Settings If you access IP Camera, to be make sure UPNP Status is Succeed. UPNP Protocol settings, as Figure below: Figure 2.
IPCAM User manual DDNS Settings Manufacturer's Domain: manufacturers provide a domain name, which has been embedded to the terminer, with its domain name in factory setting. When the user chooses domain name of the third-party, the manufacturers can't boot domain name. When null for the third-party domain, booting domain name of manufacturers automatically. Use domain name of manufacturers format Correctly : for example , http:// lyey.aipcam.com: [port number] we can neglect it if the port is No.
IPCAM User manual 2.3.3.3 Other Service Settings Configure the E-mail box to receive and send mails. The E-mail box is used for receiving the images sent after alarm and the system IP address after successful dial-up. Mail Service Settings Figure 2.17 Settings the FTP Service: Figure 2.
IPCAM User manual Alarm Service Settings Enter Alarm Service Settings page to configure Motion Detection function. Motion Detect Armed When you enable motion detect armed, the camera can be triggered to send email alerts sound you will hear.
IPCAM User manual Figure 2.18 Path Settings Setting the path of preserve video, when start record video, click , and the video file will be preserved in the specified directory Record Path. As below figure: Figure 2.
IPCAM User manual 2.3.3.4 System Device Info You can find the information about Device ID, Firmware Version and Embedded Web UI Version. Figure 2.20 Alias Settings You can Input the new name as you like.
IPCAM User manual Figure 2.21 Date &Time Settings Data &Time Settings page. Figure 2.
IPCAM User manual Users Settings Eight accounts are acceptable for this system. Here the eight users can Configure their user names and password as administrator, Operator or Visitor. Visitor: In this mode, you can only view. Operator: You can control the direction of IP Camera and set some parameter. Administrator: You can setup the advanced configurations of the IP Camera. Figure 2.
IPCAM User manual PTZ Settings (1) (2) (3) (4) (5) (6) Figure 2.24 Go center on boot : IP Camera lens to the center automatically when it starts PT speed : Set PTZ rotary speed Upward patrol speed : Set the speed of PTZ cruising upward Downward patrol speed : Set the speed of PTZ cruising downward Leftward patrol speed : Set the speed of PTZ cruising leftward Rightward patrol speed : Set the speed of PTZ cruising rightward Indicator Settings Figure 2.
IPCAM User manual Set the pilot lamp mode , the following three options (1) twinkle while connect to the internet and turn off when departed (2) twinkle while connect to the internet and turn shower when departed (3) Keep off Backup & Restore Figure 2.26 （1）Backup : Backup IP Camera all the Parameter （2）Restore : Restore IP Camera all the Parameter Log Figure 2.
IPCAM User manual 2.4 Server Push Mode Figure 2.28 Main info as below: 1. One screen 2. Used in firefox, google, safari explorer and so on 3. Sever Push: used Http sending video and seeting paramer 4.
IPCAM User manual 2.5 Sign in mobile phone Figure 2.29 Main info as below: (1)Log in web on mobile phone, can control snapshot, video operater, I/O alarm (2)Simple screen, easy to operate, can visitor the video via mobile phone web (3)Others operation similar Activex Mode, for details, please read Activex Mode part 3 HOW TO USE 3.1 Step by step to use Follow the instructions below to get started after the Camera has been mounted properly. 1) Use Network cable connect IP Camera to LAN.
IPCAM User manual 3) When IP address of the Camera listed in the Result Field of the IP Camera Tool, it means the basic configuration is completed. 4) Set the safety property of IE in the PC when you view it first time, (details:4.1.3) 5) Camera login(details:2.2) 6) Now you can use the IP Camera as Visitor, operator or Administration in the LAN. 3.2 Setting Wi-Fi of IP Camera 1) To use the wireless function of the IP Camera, a wireless router like Linksys is required.
IPCAM User manual 6) After around 30 seconds, if the LED blinks, it indicates it is working in WIFI mode. 7) Camera login. (details:2.2) 3.3 Connected to the Internet through ADSL directly Figure 3.2 1) Use Network cable connect IP Camera to PC 2) Enter IP Camera Tool to set the basic configuration, (details:2.1) 3) Login the Camera homepage as Administration and enter ADSL Settings page to input ADSL User name and password.
IPCAM User manual 1) 2) 3) 4) Use Network cable connect IP Camera to the LAN. Enter IP Camera Tool to set the basic configuration,(details:2.1) Login the Camera homepage ad Administration. Enter DDNS Settings Page and enable DDNS service. Click and the device will reboot (details:2.3.3.2) 5) You can access the Camera from Internet by domain name. 3.5 Static IP user Static IP user is not need to use DDNS for remote access.
IPCAM User manual Access the IP Camera from the Internet User can access the IP Camera from the Internet, Enter Http://116.25.51.115 into the address bar of the IE to access the IP Camera. 3.6 How to use DDNS When use ADSL, the IP Camera will connect to the Internet through ADSL automatically. For each ADSL reconnection, ISP will re-assign a new IP address for the IP Camera to facilitate the access. DDNS (Dynamic Domain Name Server) can map the dynamic IP address of an IP Camera to a fixed domain name.
IPCAM User manual 5) Re-login the Camera homepage to check and make sure the DDNS Status and UPnP Status is Succeed. 6) You only need to enter the domain name(domain name Port number http://IPCAM.vip.net:81/) in the IE address bar, the browser will visit the IP Camera. Wait for several minutes and the IP Camera will dial up to access the Internet automatically, and the communication with the DDNS server is established successfully.
IPCAM User manual 4.1.3 Network Configuration Double Check to ensure that your HTTP server software is configured and run properly. If you’re running any firewall software, make sure it’s allowing inbound connections to port 80, also, if you happen to be using a cable/DSL router, make sure you’ve set up port forwarding properly. (Consult your router’s documentation for more information). If none of these seem to be the problem, it’s documentation for more information).
IPCAM User manual 4.1.6 For example: Register procedure from a DDNS web Step 1: enter http://www.dyndns.com/ and Create Account Step2: enter your information Step3: After a minute, you will receive a E-mail from DynDNS Support and it will give you a confirmation address (e.g. https://www.dyndns.com/account/confirm/vXMVT78-KvenhydmKMWH5kg) Step4: When the Account Confirmed, login and start using your account. Choose Add Host Services(Figure 4.4) and enter Add New Hostname (Figure 4.5) page.
IPCAM User manual Step5: On the Add New Hostname page 1) Input your Hostname. 2) Choose Host with IP address Click Use auto detected IP address xxx.xx.xx.xxx then click Create Host.
IPCAM User manual Step6: Now you obtained a Dynamic Domain Name (Figure 4.6), and can use it in the DDNS Service Settings (details:2.3.3.2) 4.1.7 Why pop-up the prompt” Fail to connect to the device…”? This prompt only appeared in the case of using multiple cameras. Enter the Multi-Device Settings page(login as administrator) to check the Device When you set multiple cameras, the color changed to yellow. Figure 4.7 4.
IPCAM User manual Username and password Default administrator username: admin Default administrator password: No password 4.3 Specification Item Specifications Video Compression MJPEG video compression Video Resolution Adjustment 640*480(VGA), 320*240(QVGA) Video Parameters Brightness, contrast Video Frame 30 frame/sec(QVGA), 15 frame/sec(VGA) Communication interface One 10M/100Madaptive Ethernet interface Wi-Fi Module Supporting IEEE802.
