AXAET Anti-Loss Device Quick User Guide Model: PC023 Worked with iPhone4S / 5, iPod Touch 5 the new iPad , iPad with Retina Display . iPad Mini Android 4.
Battery Install & Replacement Take out AXAET and the complimentary CR2032 battery from the package. Install Battery a. Open Battery Cover by rotating 30 degrees in Counterclockwise to the unlock icon by a coin or other suitable tool , and then detach the battery cover from AXAET. b. Insert the CR2032 into battery slot in the arrow’s direction, and then push CR2032 down into slot. c. Close Battery Cover by rotating 30 degrees in clockwise, until the cover turn to the place.
AXAET Status Pairing 1.Long press Connect (●) button in disconnected or closed status. 2.1 beep to entering pairing and fast green light flashing with 0.5s interval, and last 60s. Paired AXAET APP will show connected and paired, The AXAET will be in paired status and the Green light will be off after 2 seconds. Disconnected 1.Out of range or control in AXAET APP to disconnect. 2.Beeps for 5s and slow continuous red-light flashing with 0.5s interval.
Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications made to this device not expressly approved by Shenzhen Aoxingao Technology Co.,Ltd may void the FCC authorization to operate this device.