Quick Start Guide

深圳奥尼电子股份有限公司
SHENZHEN AONI ELECTRONIC CO., LTD
FORMAT
版 本
日 期
DATE
比例
APPROVED
批 准
要求
±0.5°
角 度
±0.5°
变更NO.
年/月/日
±0.5mm
尺 寸 公 差
尺 寸
±0.5mm
位 数
记 事
审 核
CHECKED
DRAWN
制 图
设 计
DESIGNED
x / x . x
x . xx
1 : 1
2018.12.18
A
杨炎月
云摄像头 E97A
中性 说明书
40610E97A0001
128g铜版纸，单黑色
印刷，ROHS
品名
料号
折叠尺寸：140*100mm 展开尺寸：840*100mm
Quick Start Guide
Smart Wireless Floodlight Camera
Welcome
Thank you for choosing our Floodlight Camera.
Getting started is easy.
1. What’s Included
3. How it fits all together
Floodlight Camera Bracket Screws Wire Nuts Silicone Cap
Bracket Screw
Bracket Screw
Wire Nuts Waterproof Cushion Quick Start Guide
6.Connection Preparation
Please install the Floodlight Camera within WiFi covered area to ensure the
best working performance.
Router
(Suggest 30cm~100cm)
Camera
Smartphone
Note: Make sure smart phone is connected with your wireless router.
Please note the camera is only working under 2.4G Wi-Fi, not support 5G Wi-Fi.
7. Get the APP and Account
For the best experience, please download the ‘TuyaSmart’ APP to your smartphone from App
Store or Google Play, or you can also scan the QR code below, the APP icon will be displayed
after installed successfully.
Tuya Smart
Tuya Smart
Launch the app from your smartphone and click the Sign Up button. Follow the
on-screen instructions.
Model: E97A
Quick Start Guide
Smart Wireless Floodlight Camera
Model: E97A
4. Prepare your Floodlight Camera for installation
5. Restore power at the breaker
Loosen the knobs on the light
fixtures to rotate them out of
the way and allow access to
the mounting screws.
1
2
According to your actual
scene to adjust the view
angle of camera
After installation, switch on the button.
8.Connect the power to the camera
Appendix: Camera LED Guide
Camera Status
System starting upRed LED on
Standby for configurationRed LED blinks
Network pairingBlue LED blinks
Camera onlineBlue LED on
All trademarks are used for reference purposes only.
Thanks again for choosing our Floodlight camera! Make life safe in your hands!
Boost security mobility in your smartphone!
LED StatusNO.
1
2
3
4
You’re done!
Congratulations! Your camera is set up and ready to go.
If the indicator is not red and flashing quickly, use the reset button to press the reset button
of camera above 5 seconds, then release the button, a red LED on the front of camera will
blink quickly.
Power the device on and make sure the indicator is red and flashing quickly or a prompt
tone is heard.
Follow App's instructions to complete network pairing process, the device will connect to
your Wi-Fi network successfully.
The blue light is on, camera is ready for viewing.
9.Set up your camera
Press the Reset button for above
5 seconds to start Reset processing
2. Shut power off at the breaker
If you don’t know where your breaker is or how to
turn off power to your floodlight circuit, consult
with a licensed electrician.
American gauge power cord color：Black , White, Yellow green.
Connect Floodlight Camera cables with same color junction box cables.
Europe/Australia gauge power cord color：Blue , Brown, Yellow green.
Connect Floodlight Camera cables with same color junction box cables.
After restoring power, the lights
will turn on and your Floodlight Camera
will begin speaking to you to let you
known it’s in setup mode.
WARNING: Risk of electrical shock
Disconnect power at the fuse or circuit breaker before installing.
Verify that the supply voltage is correct. Connect fixture to a AC100V-240V,
50/60 Hz power source.
Properly ground fixture.
Always follow code standards when installing wired connections.
If you are outside of North America, installation and wiring must be performed by a licensed electrcian.
CAUTION: Risk of fire
NOTICE
Do not install near combustible or flamable surfaces.
Do not connect this light fixture to a dimmer switch or timer.
Floodlight Camera must be installed on a wall and on a UL listed junction box.
WARNING
LIVE
WIRES
KEEP OUT
Junction Box
(not included)
Camera
Yellow green
Yellow green
Blue
Brown
white
Black
Lock
Collar
Light
Adjustment
Knob
Light
Lock
Collar
Bracket
Screws
Waterproof
Cushion
Wire
Nuts
Motion Detector
Silicone Cap
GND
Blue light
blinks
Junction Box
(not included)
Camera
Lock
Collar
Light
Adjustment
Knob
Light
Lock
Collar
Silicone
Cap
Waterproof
Cushion
Motion Detector
Silicone Cap
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.