User's Manual

Bluetooth Headset Manual

Thank you for purchasing the ANS 304 stereo Headset with Bluetooth Wireless technology, we encourage you to read this

quick installation guide thoroughly to get the most of this innovative wireless headset.

1.Package content:

Headset; USB cable charger; User manual.

2.Button function:

1. Volume up (+)

2. Volume down (-)

3. Power on/off button

4. Microphone

5. Previous track

6. Play/pause button

7. Next track

8. USB interface for charging

Status indicator:

·Alternating red and green LEDs indicate headset has entered into the pairing mode and ready to be detectable for the first

time.

·Green LED flashing slowly indicates the device is powered on and/or connected

·Solid red LED indicates the battery is charging. When the battery has reached full capacity, the solid red LED will go off.

3. Charge your headset

·Use the supplied USB cable to charge the battery directly from your PC.

·Make sure that your ANS 304 headset is fully charged before using it for the first time.

·The headset battery has to be initially charged for at least for 4 hours. Thereafter, the battery will take from 2 to 3 hours to

recharge.

4. Advanced operation

Note: Before installing this product, please make sure your computer or laptop has the built-in bluetooth feature available. If

your computer is not bluetooth-enabled, your must purchase a bluetooth dongle, preferably version 2.1 or above.

PAGE 1
Bluetooth Headset Manual Thank you for purchasing the ANS 304 stereo Headset with Bluetooth Wireless technology, we encourage you to read this quick installation guide thoroughly to get the most of this innovative wireless headset. 1.Package content: Headset; USB cable charger; User manual. 2.Button function: 1. 2. 3. 4. 5. 6. 7. 8.
PAGE 2
a. Pairing the headphones with your computer 1. Make sure the headset is off. 2. Activate the bluetooth program in your computer to beging setup. 3. The “Search new device” screen will be displayed. 4. Place both devices not more than one meter away from each other. 5. Press the power button on the headset to turn it on. The green and red LEDs will start blinking in sequential order. This indicates that the headset has entered pairing mode. 6.
PAGE 3
Speaker Spec.: Speaker diameter:￠40mm Impedance:32Ω S.P.L: 118±3dB S.P.L at 1KHZ Rated power: 20mW Aggregate capability: 50mW Frequency response: 20Hz-20,000Hz Power: Battery type: Built-in 400mAh Lithium-polymer rechargeable battery Charging connector type: USB Plug Run time: Up to 6 hours of talking or music playback time Standby time: Up to 90 hours Charging time: 2 hours Operating Temperature: -10 oC - 45oC Storage Temperature: -25 oC - 60oC 7. Attention: 1. 2. 3. 4. 5. 6.