Users Manual

ManualsBrandsSHENZHEN AOME ManualsElectronicsProjector

Table Of Contents

空白页面

Your Miroir L500S Full HD 1080p Projector

A Audio Out (3.5mm) - (Optional) Connect an external

speaker or headphones.

B USB Power and Media Reader Jack – Connect a USB

Power cable to provide power to an HDMI streaming stick.

Plug a USB stick into the port and play movies, or share

pictures.

C HDMI Video Input - Connect an HDMI cable to a device

that supports HDMI video output.

D Power Port - Connect included AC Adapter for power. DC

In - 19VDC@3.7A

E Volume Up and Down - Increase/decrease the volume

output of the projector.

F HDMI Control - Switch between HDMI-1 and HDMI-2.

G Power Button - Turn the projector on/o

H Focus Controls - Turn wheels to adjust focus and keystone.

I Cooling Vent - IMPORTANT: Do not cover or block airﬂow

to the vent.

J Rubber Foot Pads - Provides stability and proper airﬂow

to cooling vents.

Summary of content (4 pages)

PAGE 1
Your Miroir L500S Full HD 1080p Projector E D F G I A J 2 Audio Out (3.5mm) - (Optional) Connect an external speaker or headphones. B USB Power and Media Reader Jack – Connect a USB Power cable to provide power to an HDMI streaming stick. Plug a USB stick into the port and play movies, or share pictures. C HDMI Video Input - Connect an HDMI cable to a device that supports HDMI video output. D Power Port - Connect included AC Adapter for power. DC In - 19VDC@3.
PAGE 2
Remote Control r your phone’s K G Confirm Connect To Your Apple Device Lightning H Home I HDMI Cable (Included) Menu USB-C Digital AV Multiport Adapter (not included) J Page Up/Down K Mute HDMI Cable (Included) IMPORTANT! Not all USB – C cables will support video. Apple Lightning Digital AV Adapter is required for iPhone.
PAGE 3
Connecting Your Projector Wirelessly WIFI • Connect the L500S to your WIFI network. Open Settings, and select WIFI and follow the instructions. Troubleshooting The image is blurry • Update the projector if prompted • Adjust the projected image’s focus by rolling the focus wheel forwards or backwards. • Check that the surface you are projecting on is smooth and non-reflective. • Check that the projector’s lens is clean and free of debris.
PAGE 4
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.