A1-TWS Bluetooth stereo earphone Autopair User Manual 1
Packing details Bluetooth earphone (2PCS) Earbuds charging compartment USB charging cable Operation manual Packing box Product specification Model：A1-TWS input：DC 5V play time：about 4hours earbuds charging time：about 1 hour compartment charging time：about 1.
Start Guide 1.Bluetooth pair Open the charging compartment, remove the earphones, the headset will automatically turn on and pair, the matching process takes about 5 seconds (the indicator light is: the headset is red and blue alternately flashing quickly, after the successful pairing, the red and blue lights flash slowly). Find the corresponding Bluetooth name A1-TWS from the Bluetooth list of the mobile phone and click pairing. The voice prompt connection is successful in about 5 seconds.
3.ON/OFF The earphone is placed in the charging compartment and the headset is automatically turned off and charged. After the headset is taken out of the charging compartment, it will automatically turn on, and long touch function area will be turned off for 4 seconds; after turn off,long touch the function area again for 3 seconds will be turned on. 4.Call After the headset is connected to the phone, you can make a call. When receiving a call, the voice prompts the caller number.
Precautions for use 1. Headphones should be stored in a dry and ventilated environment to avoid contact with oil, water vapor, steam, moisture and dust, so as not to affect product performance. 2. Avoid using irritating, organic solvents or items containing these ingredients to clean the headphones. 3. The earphones should be correctly and professionally used according to the requirements. Pay attention to the influence of the use environment on the headphones.
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
