2019 年 5 月 8 日 WF1011 Module Specifications s V1.0 Time Version Description of the Update or modification Released by 2018/12/10 V1.0 First release Ben Lee © 2015 Ant-hero has all rights reserved. Shenzhen Ant-hero Networking Technology Co., Ltd (Abbreviation: “Ant-hero” or our company) reserves all the rights and the logo of owner for the content and the actual name of company and product mentioned in file.
专业物联网模块及智能家居系统方案提供商 官网：http://www.antheroiot.com 1.1 Product Overview ................................................................................................................ 1 1.2 Product Features .................................................................................. 错误!未定义书签。 1.3 Product Applications ............................................................................ 错误!未定义书签。 2. Technical Specifications .......................................................................
Professional solution provider for IoT and smart home systems Website: http://www.antheroiot.com 1. Production Introduction 1.1 Product Overview MY_WFM7231 Wi-Fi module is a solution for single-mode Low Energy, in accordance with 2.4 GHz 802.11b/g/n data transmission protocol. It is truly a SOC solution: the chip integrates all the software and hardware functions of 802.11b/g/n, covering radio frequency and MAC layers.
Professional solution provider for IoT and smart home systems Website: http://www.antheroiot.com ◆ Built-in 256 Kbyte data RAM ◆ Working voltage: 3V-3.6V ◆ Compact size (18*15*2.25mm), low cost, low power consumption yet high sensitivity ontransmitting and receiving data 1.3 Product Applications: Smart lighting Smart home appliances Medical and healthcare Industrial wireless control Video surveillance Intelligent buildin 2 Shenzhen Ant-hero Networking Technology Co.
Professional solution provider for IoT and smart home systems Website: http://www.antheroiot.com 2. Technical Specifications 2.1 Model WFM7231 is a Wi-Fi controlling module developed on the basis of BEKEN bk7231 chip. 2.2Electrical Parameters Product Model MY_WFM7231 Wi-Fi Module Radio Frequency Range 2.402~2.480 GHz Radio Frequency Power ≤8 dBm Communication distance 40~50m Working voltage 3.
Professional solution provider for IoT and smart home systems Website: http://www.antheroiot.com Safety Codes & Standards EU: ETSI EN 300 328 EN 300 440 class 2 America: FCC CFR47 part15 Japan: ARIB STD-T66 2.3Module Pin Definition Pin 1 2 3 4 5 6 7 8 9 10 11 Name CEn SENSOR_IN GPIO13 PWM2 PWM1 VCC GND I2C_SDA I2C_SDL UART_TX UART_RX Type CEn SENSOR_IN GPIO13 PWM2 PWM1 VCC GND I2C_SDA I2C_SDL UART_TX UART_RX Function description CEn SENSOR_IN GPIO PWM2 PWM1 3.
Professional solution provider for IoT and smart home systems Website: http://www.antheroiot.com 5 Shenzhen Ant-hero Networking Technology Co.
Professional solution provider for IoT and smart home systems Website: http://www.antheroiot.com 3. Instructions on Usage 3.1Illustration on pin installation size 6 Shenzhen Ant-hero Networking Technology Co.
Professional solution provider for IoT and smart home systems Website: http://www.antheroiot.com 3.2Circuit Illustration on Module Used for regular application 3.
(OEM) Integrator has to assure compliance of the entire end-product incl. the integrated RF Module. For 15 B (§15.107 and if applicable §15.107) compliance, the host manufacturer is required to show compliance with 15 while the module is installed and operating. Furthermore the module should be transmitting and the evaluation should confirm that the module's intentional emissions (15C) are compliant (fundamental / out-of-band). Finally the integrator has to apply the appropriate equipment authorization (e.
Module statement The single-modular transmitter is a self-contained, physically delineated, component for which compliance can be demonstrated independent of the host operating conditions, and which complies with all eight requirements of § 15.212(a)(1) as summarized below. 1) The radio elements have the radio frequency circuitry shielded. 2) The module has buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal.
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 2.3 2.4 - List of applicable FCC rules FCC Part 15.247 - Summarize the specific operational use conditions This transmitter/module and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This information also extends to the host manufacturer’s instruction manual. 2.
2.9 Information on test modes and additional testing requirements. Information on test modes: The host manufacturer can use software for access to the test modes. Connected to the device through the serial port of the host product and control the module. If it does not work, then the host product manufacturer should coordinate with the module manufacturer for access to test mode software. The following provides guidance to host product when installing this module on how they may verify the end product: A.
