AWM61G-X User’s Manual Part Name：802.11b/g PCI-Express Mini Card Part No.：AWM61G-X Version：V1.
AWM61G-X User’s Manual Revision History Release Date Revision Initials 1.0 2009-4-24 Initial release SH Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWM61G-X User’s Manual Table of Contents 1.INSTALL THE DRIVER------------------------------------------------------------------------------------------- 5 2.
AWM61G-X User’s Manual IMPORTANT NOTE In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
AWM61G-X User’s Manual AWM61G-X User’s Manual 1.Install the driver The installation driver CD will automatically activate the auto run installation program after you insert the disk into your CD drive. Step1: Insert the installation driver CD into your CD-ROM. Step2: Select the language of English and click Next to continue Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
AWM61G-X User’s Manual Step3: Clik Install to continue. Step4: To install the driver at the designated folder and start copying files until it finishes the installation. Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWM61G-X User’s Manual Step5: Click Finish to complete the installation and restart your computer. Step6: After finished installing the driver and utility on your system, a new icon should appear in the Windows System Tray automatically. If the icon is in red, it means that the WLAN USB Adapter has not been inserted into the USB port of PC. Plug the USB adapter into the USB port of your PC. Windows Vista/XP/2000 will automatically detect the USB Adapter. 2.
AWM61G-X User’s Manual Once a network is chosen, the signal strength and link quality are displayed in the window as shown below. Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWM61G-X User’s Manual The link quality and signal strength bar chart is only active when the node is in infrastructure mode. The bar graph displays the quality and strength of the link between the node and its Access Point. Link Quality is a measurement of receiving and transmitting performances over the radio.And the Network Address is shown in the red pane. Tx/Rx Frame displays the instantaneous wireless Transmit and Receive throughput in bytes per second. These values are updated every two seconds.
AWM61G-X User’s Manual Appendix A: Terminology n ad hoc network A network composed solely of stations within mutual communication range of each other via the wireless medium (WM). n access point (AP) Any entity that has station functionality and provides access to the distribution ser-vices, via the wireless medium (WM) for associated stations. n Station (STA) Any device that contains an IEEE 802.11 conformant medium access control (MAC) and physical layer (PHY) interface to the wireless medium (WM).
AWM61G-X User’s Manual Appendix B: Important Notices Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
AWM61G-X User’s Manual This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 20 cm is maintained between the antenna and users,and The transmitter module may not be co-located with any other transmitter or antenna.As long as 2 conditions above are met, further transmitter test will not be required.
