Smart Watch Model Name: Model 3, X1, X2, X3, X4, X5, X6, X7, X8, X9, X10, GTA Instructions Please check the manual before use Precautions before use: 1. The company reserves the right to modify the contents of this manual without any notice without prior notice. Some functions are different in specific software versions, which is normal. 2. Please charge the product for more than 2 hours before use. 3. Before using the product, please download and connect the APP on your mobile phone.
meters. The above behavior may cause water ingress into the product, which is destructive use and does not enjoy product warranty and free maintenance service. 一：product description It is recommended to use mobile phone models (the version is too low may have connection problems): Android phone: Support operating system version 5.0 and above; IPhone: Support operating system version 9.0 and above; 二：APP download and APP connection watch 1.
Bluetooth connection is normal. The APP software name is: Qwear. (Qwear Download QR code) Qwear application pay attention: 1. 1. Apple phone, if it is in standby or hibernation (black screen state) for a long time (2 hours or more), Qwear will be cleared by the IOS system of the phone itself. At this time, the APP application is disconnected from the watch, and the APP application function will not be available. use. Open the app again, it will automatically reconnect to the watch. 2.
operation is to ensure that the APP application can maintain the Bluetooth connection with the watch when the mobile phone is in standby (the mobile phone has no bright screen), and is not cleaned up by the Android system. And will not use data in the background, nor does it affect the power usage of the phone. 2. APP application and watch connection method: 1.
3. After the successful login of the Apple mobile phone, the connection steps are the same as above. The difference is: after the scan is successful, the Bluetooth pairing request of the watch and the mobile phone will be prompted. Please allow Bluetooth pairing. Then complete the pairing connection between the mobile APP application and the watch. 4.
that needs to be pushed separately. 3.2 Call reminder switch The notification reminder menu is equipped with a call reminder switch. Click on to accept the notification after the phone calls. The watch can hang up the call and exit the call mode. When the phone answers the call, the watch will also exit the call interface and vibration prompt 3.3 Alarm reminder Click Alarm Reminder to enter the alarm setting page, click Add Alarm in the upper right corner, and add up to 5 alarms.
3.7 Lifting the wrist to brighten the screen Click the button to turn on or off the function of lifting wrist and bright screen. 3.8 Heart rate monitoring Click the heart rate monitoring progress heart rate monitoring setting page, after opening, you can set the monitoring start, end time and time interval. The watch will automatically monitor the heart rate according to the set time and synchronize the data in the heart rate bar of the APP application. 3.
3.12 Unbind You can unpair the watch from the mobile app. Note: IOS system, you need to enter: Settings-Bluetooth, ignore Bluetooth pairing, you can completely remove the binding. 三： main functions of smart watches 3.1Basic operation 3.1.1Turn on: When the watch is off, long press the button on the side of the watch ， 3.1.2 Shutdown: When the watch is on screen, 3.1.3 The watch page switching operation is as follows: 1. Slide the dial interface from top to bottom to enter the status bar interface 2.
3.1.4 Pull down the status bar, pull down from the dial interface to enter the status bar, the interface displays brightness, do not disturb mode, battery power, Bluetooth connection status 2.2 Dial switch On the dial interface ，Enter the dial switching interface, slide the screen up and down to switch the dial, and single-click to select the dial. 2.3 steps The device is enabled by default with the pedometer function, which displays the pedometer data in real time.
including: distance, time, calories consumption, etc. After setting, click OK below the display to save, that is to enter the sport interface. Note: Sports data saving rules: data is only saved when the exercise time is greater than 5 minutes or the number of exercise steps is greater than 200 steps; it can be saved if any one of the conditions is met. 2.4.
The default sleep monitoring time of the watch is from 21:00 to 9:00 the next morning. After the pairing is successful, the sleep data will be automatically synchronized in real time (or manually) to the APP. Remarks: The watch side will automatically recognize and judge the sleep state.
the timing, click the button at the bottom right to resume the timing, select the resume button to clear the timing data. 2.9 Settings 2.9.1 Click Settings to enter the setting interface, the setting interface has about the machine, search phone, and shutdown function. 2.9.2 About: display watch model, device address, software version 2.9.3 Discover mobile phones: Click Find Mobile Menu to start searching for mobile phones 2.9.4 Shutdown: click the shutdown setting to shut down 3.
you can remotely take pictures of the mobile phone; (some mobile phones need to open the camera function of the mobile phone first). 3.3 Browse the phone After successfully pairing with the APP, click on the watch to find the phone, click on the watch to find the phone page, phone vibration plus ringtone prompt. 3.
The watch has Bluetooth to synchronize the information of the mobile phone to the watch, which can be easily viewed and cannot be answered. The voice message can only display the incoming message, and cannot listen to the voice message on the watch. Four: matters needing attention 4.1 It is recommended to install only one connection app on the mobile phone to ensure that the connection and use are normal.
keep the mobile APP running in the background. Android phone setting background operation settings-application management-background method: open the phone management-Qwear-permissions management-choose to run in the background. (Different phones may have different settings due to different versions and models) 4.4 The heart rate test requires the watch to be worn tightly. If it is too tight or too loose, the test may be inaccurate.
hold down the power button for more than 3 seconds. 5.1.2 The battery power may be too low, please charge in time. 5.1.3 The battery may be in low battery protection, the normal charger does not respond to charging, please try to use a charger with an output power of 5V/1V to activate it. 5.2 The watch will shut down by itself The battery may be too low, please charge. 5.3 The watch is used for a short time 5.3.
during daytime sleep, and the default sleep monitoring is from 9pm to 9am. FCC Warning. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
