User Manual 1. POWER After connecting the power adapter, the photo frame will automatically turn on.. When it is on, press and hold power button for approximately 3 seconds to access reboot or power off menu. Short press on power button will turn off/on screen（but leave the photo frame in on position）. 2. USB Connect a USB flash drive. USB is for service use only. 3. RESET Use a needle or paper clip to reset unit. 4. MicroSD card Load external max 32GB microSD memory card here. 5.
Contents Getting started……………………………………………………………………………………………………………………3 Frameo app…………….……………….……………………………………………………………………….…………………3 Frameo quick setup……………………………………………………………………………………………………………4 Start using frameo………………………………………………………………………………………………………………4 Navigating your frameo…………………………………………………….
Getting started Thank you for purchasing your very own frameo. First, to set up your frame follow the “Quick start guide” included in the package. If you are new to using frameo then start by following the frameo quick setup on page or follow the on screen guide when powering it on for the first time. Once you have set up your Frameo frame, start connecting it to your friends and family.
Frameo quick setup When starting your frame for the first time, you will need to setup the frame. First you start by selecting a language. This will be the language used throughout frameo. Connect your frame to the internet by connecting it to a Wi-Fi. If a newer version of the frameo software is available, then you will be prompted with an update dialog.It is recommended to update your frame immediately if prompted. Enter your name, and the location where you have placed your frame e.g.
Navigating your frameo You interact with your frame through its touchscreen. Swipe left or right to go though your photos. To access the menu bar, simply tap once on the screen, this will show the menu. In the menu you will find quick access to the add friends dialog and the settings menu . From the menu it is also possible to hide the currently shown photo and to adjust the positioning of the photo. Settings Through settings, you can personalize your frame to your needs.
Manage photos Show/hide photos: Select which photos to hide by tapping the particular photos you wish to hide. Hidden photos will NOT be deleted from your frame, you can always select them to be shown again. Use to hide or show all photos. Delete photos: Select photos that you want to permanently delete from your frame by tapping the photo. Use to select or deselect all and to delete the selected photos Import photos: Allows you to import photos from an external max 32GB SD card.
Display and slideshow Timer Define the duration a photo should be displayed. Show caption Sets whether or not to display the captions that your friends have sent with the photo. Check to display captions. Uncheck to hide captions. Brightness level Adjust the brightness level of the screen. Wi-Fi Set which Wi-Fi the frame should be connected to. If you are connecting to a network with a captive portal a web browser icon should be appear in top right corner of the screen.
About Check for update Check if an update is available for your frame. Share anonymous analytics data Sharing anonymous analytics data helps us tremendously with improving the frameo software. We understand if you do not wish to share this data withus. Set checked if you wish to help us improve frameo. Set unchecked to deny the sharing of anonymous analyt ics data. Guide Opens the quic start guide, that was shown when you first started the frame.
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
