Intelligent temperature measuring box Instruction manual AFU-THY-0004
Thank you for purchasing the contact safety service intelligent temperature measuring box. In order to use this product safely, please read the instruction manual before use. Please keep it properly after reading, so that you can consult it at any time. The product is powered by three 1.5V AA alkaline batteries or USB / DC5V. This product is only for testing temperature.
Applicable scope The temperature is displayed by the thermal radiation of the measured object. Technical indicators Normal operating conditions:ambient temperature: 15 ℃ ~ 35 ℃ Relative humidity: ≤ 85% Power supply voltage: DC 4.5V (3 AA alkaline batteries) or USB / DC5V Product ruler: 116.05mm * 86mm * 25.45mm Host weight: About 170g (without battery) Measurement range: 0 ℃ ~ 100 ℃ Accuracy: 32 ℃ ~ 34. 9 ℃ ± 0.3 ℃ 35℃〜 4 2℃ ± 0.2℃ 42.1℃〜 4 2.9℃ ± 0.3℃ Power consumption: ≤ 0.
External dimension drawing（116.05mm*86mm*25.45mm) Special storage conditions and methods The product must be kept clean and in a dry place. Do not put the intelligent temperature measuring box on the ground with electric shock. Do not store the intelligent temperature measuring box in the extreme temperature environment of and humidity 95%.
Product performance Accuracy: measurement deviation ≤± 0.2 ℃. Fast: measurement time 1 second. Easy to use: close to automatic detection without operation. Bluetooth: check the temperature measurement data and working status of the product at any time. Non contact: non contact measurement of material temperature. Fever alarm: set alarm temperature freely. Times of use: the key supports 100000 times. Large screen display: 4.2-inch large screen with three color backlight display, clear and readable at night.
measured and the measured ambient temperature is lower than that of the ground to be measured, the test shall be carried out less frequently Stay in the environment for more than 5 minutes, and measure it after it is caused by the ambient temperature, otherwise it will affect the measurement result. 6.
5. Fahrenheit temperature setting - F4 setting method Enter F4 Fahrenheit temperature setting mode, the screen displays the current Fahrenheit or Celsius temperature mode, press the left or right key to switch between measuring Fahrenheit or Celsius temperature. matters needing attention -Follow the maintenance recommendations in this manual. -This product is suitable for professional or family travel. -Please keep the product out of the reach of children.
Battery installation and maintenance 1. The product can make 3 No. 5 alkaline batteries, which can make 20000 times continuously in theory. When there is a battery symbol flashing on the screen, it means that the battery power is not and the battery needs to be replaced. 2. Open the battery cover to replace the battery, and pay attention to the correct position of the positive and negative poles of the battery. 3.
Troubleshooting Question 1: what is "Lo" when part of the temperature is measured in the same environment Why? Answer: the measurement distance is too far. At this time, the measurement may be the empty temperature. The instruction requires 1cm ~15 cm distance. Question 2: what is the temperature correction setting function in the product? Answer: the temperature correction setting function in the product is to calibrate the temperature.
Accessories packaging Smart temperature measuring box * 1 Box * 1 Warranty card * 1 Instruction * 1 Production information Manufacturer / after sales service unit: ShenZhen AFU Intelligent Internet Technology Co.,Ltd. Registered/registeredaddress: 808A, No. 3101, Qianhai Road, Xinghai Mingcheng Community, Nantou Street, Nanshan District, ShenZhen Post code:518000 Contact number / customer service hotline:（+86-755）32904615 FCC Warning This device complies with Part 15 of the FCC Rules.
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
