SAAT-F527A Active RFID Reader User Manual
Contents 1 Product Overview ............................................................... 1 1.1 Overview ..................................................................... 1.2 Applications and usage ....................................................... 1.3 Product model ................................................................ 1.4 Working environment ......................................................... 1.5 Safety and protection .........................................................
Dear Customers: Thanks for your trust and support! We try best to provide you comprehensive service and technical support. This manual will introduce specific usage of managing software of SAAT-520A series Reader. Managing software mainly works for SAAT-520A series reader system, parameters configuration and inquiry, communication options, tags reading and demo function, etc. Please read the user manual and related reference of CD disk carefully before development.
1 Product Overview 1.1 Overview Image1 SAAT-F527A F527A omni-directional reader is independently R&D by HTRFID, operating in the 2.4—2.48 GHz band, which is widely used with characteristics of high-recognition, long-range, powerful, highreliability & scalability, etc. 1.
Humidity:20%~95%(RH) 1.5 Safety and protection Please check your power voltage before install and connect the device. The input voltage of our rfid reader is 100V~240V/50~60Hz. 2 Technical characters 2.1 Functions SAAT-F527A is a omni directional 2.45GHz active rfid reader with work between 2.4-2.4835GHz working frequency.
(3) Modulation: GFSK (4) Communication rate:1Mbps(Default) (5) Reading distance:≥80m@EIRP=0dBm 2.3 Communication Interfaces (1) Communication interfaces: RS-232, 10/100M Adaptive Ethernet interfaces (2) RF Port: SMA×1 (3) GPIO:Input×2,12V Output×2,Relay output×2 (4) Power: 9～32V 3 Structural Features 3.1 Composition Outer case Made of aluminum die-casting, F527A reader has better strength and electromagnetic compatibility.
Image 3 3.4 LED lights There are 3 LED lights to show the working status of SAAT-F527A: LED lights 3.5 Antenna ports Antenna ports Right port is for GPRS/WiFi and the left one is for 2.45Ghz active rfid antenna. 4 Interfaces description 4.1 Hardware interfaces 4.1.1 GPIO ports GPIO Port definition Pin NO.
1 BUS+ RS485 /Wiegand+ Wiegand and RS484 2 BUS- RS485 / Wiegand - output 3 G 4 V1 Power output 5 V2 Power output 6 G Ground 7 OUT1 Relay 1 8 OUT1 Relay 1 9 OUT2 Relay 2 10 OUT2 Relay 2 11 IN1 + Optoelectronic input + Optoelectronic 12 IN1 - Optoelectronic input - input 1 13 IN2 + Optoelectronic input + Optoelectronic 14 IN2 - Optoelectronic input - input 2 Ground 12V output 12V output Relay 1 Relay 2 4.1.2 RS232 ports Serial port definition Pin NO.
5 Installation and Configuration Note Please read this chapter carefully before SAAT-F527A reader installation. 5.1 Installation Attention Points 1, Ensure your personal and property safety, the following preparatory work must be done before the installation: 2, Check power plug performance, whether the Reader operating power is in line with the current input power. 3, Ensure the power grounding well. 4, Measure and estimate the distance between the device and system (as Reader & PC, Reader & Power plug).
5.3 Installation steps 5.3.1 Fixing SAAT-F527A Reader There are the following installation ways according to different locations. （1）Desktop Installation Put the reader on the working platform Attentions： Reader and related cable are not cut off accidentally, or unexpected power outages. If the working plate surface is shaking or leaning, fixed measures should be taken. （2）Wall-hanging Installation SAAT-F527A reader can be fixed on the vertical surface by accessories (mounting screws, nuts) equipped.
6 Debug FAQs This chapter will explain clearly about Debug FAQs as incorrect and inaccurate installation and solutions provided. Main FAQs as follows 6.1 Reader no response Power indicator is off ----> Check the power source. Power indicator is on ----> Check the related cable connection and corresponding items based on the related indicator state. Ethernet connecting mode ----> Check if the connected IP is correct and there is conflict between IP address or not.
7 Inspection and Acceptance Standard of Inspection and Acceptance from two ways: Structure and performance. 7.1 Inspection and Acceptance of Structure Check if installation is in line with the standard, and the connection between devices is working. Whether the reader fixed firmly without loose. Whether Various cables connected and fixed firmly。 Whether Screws are tightened 7.
