User's Manual

ManualsBrandsShenzhen Aerospace Innotech ManualsElectronicsRFID Tag

HT2.008.008SS

HT-PW361-S Active Anti-Tamper Wristband Tag User Manual

1 Product overview

HT-PW361-S active tags are working in the 125KHZ and 2.446GHz-2.454GHz band in

accordance with the requirements of the Telecommunications Authority in the public frequency band.

The schematic diagram of the tags is as follows:

Picture 1 HT-PW361-S Active Tamper Wristband Tag

1.1 Application

The 2.45 GHz active RFID tag is wore on person's wrist, is used to identify and track personnel

monitoring system. It is integrated with reader, incentive, computer and other components of active RFID

application system. This product is mainly used in personnel positioning and monitoring management.

1.2 Model description

HT-PW361-S is an active tamper wristband tag with LF wake up function, this user manual is used

for HT-PW361-S only

1.3 Working environment

A complete RF identification data collection is the first prerequisite for the normal operation of

HT-PW361S active tamper wristband tag. Its application is shown in picture 2.

Summary of content (6 pages)

PAGE 1
HT2.008.008SS HT-PW361-S Active Anti-Tamper Wristband Tag User Manual 1 Product overview HT-PW361-S active tags are working in the 125KHZ and 2.446GHz-2.454GHz band in accordance with the requirements of the Telecommunications Authority in the public frequency band. The schematic diagram of the tags is as follows: Picture 1 HT-PW361-S Active Tamper Wristband Tag 1.1 Application The 2.45 GHz active RFID tag is wore on person's wrist, is used to identify and track personnel monitoring system.
PAGE 2
HT2.008.008SS Typic RFID application for wristband 2 Performance 2.1 Function HT-PW361-S active tamper wristband tag is accordance with the requirements of the Telecommunications Authority in the public frequency ban, the main function is below: ① Work frequency band 2.446GHz-2.
PAGE 3
HT2.008.008SS 2) RF output power：0dBm±1.0dB （Set as fixed value） 3) Frequency accuracy：No less than ±20ppm 4) Void rate: 1Mbps 5) Modulation: GFSK 6) Reading range：No less than 50m @EIRP=2.
PAGE 4
HT2.008.008SS 3.2 Volume and weight HT-PW361-S active tamper wristband tag size is 248mmX46mmX19mm，weight is：50g。 3.3 Software interface HT-PW361-S active tamper wristband 2.4G software interfaces conform to 《Q/HT 1006-2011 2450MHz active RFID air interface parameters V13》regulations and standards. 4 Wear and test Before wearing HT-PW361-S wristband tag, please read this manual carefully. 4.
PAGE 5
HT2.008.008SS Tag maintenance includes the following two aspects: 2) Check installation for looseness. 3) Read and confirm the power of the wristband tag with activator and reader at regular time. 7 Battery charging The battery charging steps are as follows： 1) Remove the anti-detachment buckle by using the matching strong magnetic base； 2) Remove the wristband and place it on the desktop with back facing up.
PAGE 6
HT2.008.008SS 10 Transport and storage 10.1 Transportation requirement HT-PW361-S active tags meet the requirements of relevant standards such as highway, railway, air and sea transport. Attention in transportation: It must be guaranteed not to be eroded by severe collision, rain, chemical corrosive drugs and harmful gases. 10.